LG Electronics Stereo System LF D7150 User Manual

LGEUS_LF-D7150A.JA1ULLN(LF-D7150)_ENG_133E  
DVD MICRO HI-FI SYSTEM  
OWNER’S MANUAL  
MODEL : LF-D7150  
CD - R/RW  
Please read this manual carefully before operating your set.  
Retain it for future reference.  
Designs and specifications are subject to change without  
notice for improvement.  
Call us and we will  
guide you through  
your first recording,  
for free.  
1-800-243-0000  
 
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERS MANUAL.  
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE.  
This product has been designed and manufactured to assure personal safety. Improper use can result in electric  
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-  
dures for installation, use, and servicing.  
This product does not contain any parts that can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read these instructions. - All these safety and oper-  
ating instructions should be read before the product is  
operated.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the product.  
2. Keep these instructions. - The safety, operating and  
use instructions should be retained for future refer-  
ence.  
11. Only use attachments/accessories specified by  
the manufacturer.  
3. Heed all warnings. - All warnings on the product and  
in the operating instructions should be adhered to.  
4. Follow all instructions. - All operating and use  
instructions should be followed.  
5. Do not use this product near water. – For example:  
near a bath tub, wash bowl, kitchen sink, laundry tub,  
in a wet basement; or near a swimming pool; and  
other areas located near water.  
12. Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with  
apparatus. When a cart is used, use caution  
when moving the cart/product combination to  
avoid injury from tip-over.  
6. Clean only with dry cloth. – Unplug this product from  
the wall outlet before cleaning. Do not use liquid  
cleaners.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturers instructions. -  
Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the  
product and to protect it from over- heating. The open-  
ings should never be blocked by placing the product  
on a bed, sofa, rug or other similar surface. This prod-  
uct should not be placed in a built-in installation such  
as a bookcase or rack unless proper ventilation is pro-  
vided or the manufacturer’s instructions have been  
adhered to.  
13. Unplug this product during lightning storms or  
when unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the product has been  
damaged in any way, such as power-supply cord  
or plug is damaged, liquid has been spilled or  
objects have fallen into the product, the product  
has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
8. Do not install near any heat sources such as radi-  
ators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A ground-  
ing type plug has two blades and a third ground-  
ing prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
3
 
Table of Contents  
Before Use  
Introduction  
Playable Discs  
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . 3  
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Front Panel/ Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
DVD  
(8 cm / 12 cm disc)  
Audio CD  
(8 cm / 12 cm disc)  
Preparation  
In addition, this unit can play a DVD R, DVD RW discs,  
CD-R/CD-RW that contain audio titles, MP3, WMA,  
JPEG or DivX files.  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9  
Before Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-16  
Operation  
Operation with DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-20  
Operation with Audio CD and MP3/WMA Disc . . . . . . . 20-22  
Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Operation with DivX Disc . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Operation with RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Notes  
– Depending on the conditions of the recording equip-  
ment or the CD-R/RW (or DVD R/RW) disc itself,  
some CD-R/RW (or DVD R/RW) discs cannot be  
played on the unit.  
– Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
Reference  
Do not use irregularly shaped CDs (e.g., heart-shaped  
or octagonal). It may result in malfunctions.  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Notes on DVDs  
Some playback operations of DVDs may be intentionally  
fixed by software manufacturers. As this unit plays  
DVDs and according to disc content designed by the  
software manufacturer, some playback features of the  
unit may not be available or other functions may be  
added.  
About Symbols  
About the  
symbol display  
” may appear on the TV screen during operation.  
Refer also to the instructions supplied with the DVDs.  
Some DVDs made for business purposes may not be  
played on the unit.  
This icon means the function explained in this owner’s  
manual is not available on that specific DVD disc, or at  
that time.  
Regional code of the DVD player and DVDs  
This unit is designed and manufactured for playback of  
region “1” encoded DVD software. The region code on  
the labels of some DVD discs indicates which  
type of player can play those discs. This unit  
can play only DVD discs labeled “1” or “ALL”. If  
you try to play any other discs, the message  
“Check Regional Code” will appear on the TV screen.  
Some DVD discs may not have a region code label even  
though their playback is prohibited by area limits.  
About the disc symbols for instructions  
A section whose title has one of the following symbol is  
applicable only to the disc represented by the symbol.  
DVD DVD  
1
CD  
Audio CDs  
MP3 MP3 disc  
WMA disc  
JPEG disc  
WMA  
JPEG  
DivX DivX disc  
About the symbols for instructions  
Indicates hazards likely to cause harm to the unit itself or  
other material damage.  
Indicates special operating features of this unit.  
Indicates tips and hints for making the task easier.  
4
 
Front Panel/ Rear Panel  
1
OPTICAL  
IN  
19  
2
3
4
R
L
FM  
SOUND  
XDSS  
PLAY  
14  
13  
12  
L
A
U
X
GND  
AM  
TUN. (-)  
TUN. (+)  
18  
17  
R
5
6
STOP  
SPEAKERS  
XTSpro  
EQ  
VOLUME  
15  
16  
FUNCTION  
MICVOL.  
7
8
11  
10  
9
1. CD DOOR  
9. HEADPHONE SOCKET ( PHONES) - 3.5mm  
10. USB connector  
2. DISPLAY WINDOW  
3. • POWER ( ) button  
• CLOCK button  
11. MIC JACKS (MIC1, MIC2) - 3.5mm  
12. MIC VOLUME KNOB (MIC VOL.)  
13. EQUALIZER PATTERN (EQ) button  
14. XDSS button  
TIMER button  
• SET/CD button  
[]  
15. ANTENNA Connector  
• MP3 OPT. button  
16. POWER CORD  
• MONO/STEREO (MONO/ST.) button  
Z OPEN/CLOSE button  
17. AUXILIARY INPUT (AUX) connector  
18. SPEAKER Connector  
4. SOUND button  
19. • COMPONENT VIDEO OUT (PROGRESSIVE SCAN)  
(Y Pb Pr) Connector  
5. • PLAY ( ) button  
G
• STOP (x) button  
• TUN. (-/+) buttons  
• MONITOR OUT Connector  
• S-VIDEO OUT Connector  
• OPTICAL IN Connector  
• CD SKIP (. bb/BB >) buttons  
6. XTSpro button  
7. FUNCTION (FUNC.) DIAL  
8. VOLUME knob  
5
 
Remote Control  
1. POWER button  
POWER  
MUTE  
USB  
2. FUNCTION SELECT buttons  
(TUNER/BAND, DVD, AUX/D.INPUT, USB)  
3. NUMERIC buttons (0-9)  
4. EQUALIZER (EQ), XDSS, XTS pro, SOUND,  
AUDIO, SUBTITLE buttons  
20  
19  
1
2
AUX/  
TUNER/BAND  
DVD  
D.INPUT  
5. SET UP button  
SLEEP  
6. • ARROW buttons (  
/
/
/
)
3
(For use in highlighting a selection on a GUI  
menu screen, TITLE and MENU screen.)  
• PRESET (-/+) buttons  
XTS pro  
EQ  
XDSS  
• TUN. (-/+) buttons  
7. SELECT/ENTER button  
8. MENU button  
4
5
AUDIO  
SOUND MODE  
SET UP  
SUBTITLE  
(Use the MENU button to display the menu screen  
included on DVD video discs.)  
PRESET  
DISPLAY  
TUN.+  
18  
+
9. SCAN (  
)/ SLOW (t T)/ SKIP (./>)  
FF/GG  
/
TUN.-  
buttons  
SELECT  
/ENTER  
6
10. PROG./MEMO, REPEAT, REPEAT A-B buttons  
11. STOP (x), PAUSE([])/ STEP, PLAY ( ) buttons  
12. CLEAR/ ZOOM/ DIMMER/ DISP.MODE buttons  
G
7
8
9
MENU  
TITLE  
_
17  
16  
13. ECHO VOL. (  
14. MIC VOL. (  
/
) buttons  
) buttons  
PROG./MEMO  
SCAN  
SLOW  
SKIP  
/
15. MARKER/ SEARCH buttons  
16. VOLUME -/+ buttons  
17. TITLE button  
REPEAT  
10  
REPEAT A-B  
(Use the TITLE button to display the title screen  
included on DVD video discs.)  
18. DISPLAY button  
19. SLEEP button  
20. MUTE button  
STOP  
PAUSE/STEP PLAY  
11  
12  
13  
CLEAR  
ZOOM  
MARKER  
SEARCH  
15  
14  
DIMMER DISP.MODE  
ECHO VOL.  
MIC VOL.  
Remote Control Operation Range  
Remote control battery installation  
Point the Remote Control at the remote sensor and  
press the buttons.  
Detach the battery cover on  
the rear of the Remote  
Distance: About 23 ft (7 m) from the front of the  
remote sensor  
Control, and insert two R03  
(size AAA) batteries with  
Angle: About 30° in each direction of the front of the  
remote sensor  
and  
aligned correctly.  
Caution  
Do not mix old and new batteries. Never mix different  
types of batteries (standard, alkaline, etc.).  
6
 
Connections  
Connecting to a TV  
Progressive Scan (ColorStream® pro) connection  
Make one of the following connections, depending on  
the capabilities of your existing equipment.  
If your television is a high-definition or “digital ready”  
television, you may take advantage of this unit’s  
progressive scan output for higher video resolution.  
If your TV does not accept the Progressive Scan  
format, the picture will appear scrambled if you try  
ips  
Depending on your TV and other equipment you wish  
to connect, there are various ways you could connect  
the unit. Use one of the connections described  
below.  
Please refer to the manuals of your TV, VCR, Stereo  
System or other devices as necessary to make the  
best connections.  
Progressive Scan on the unit  
.
Connect the COMPONENT VIDEO OUT (PROGRESSIVE  
SCAN) jacks from the unit to the corresponding in jacks  
on the TV using an optional Y Pb Pr cable (C).  
Caution  
ote  
Make sure the unit is connected directly to the TV.  
Select the correct AV input on your TV.  
– Set the Progressive to “On” in the Setup menu for  
progressive signal, see page 14.  
– Do not connect your unit to TV via your VCR. The  
DVD image could be distorted by the copy protection  
system.  
Video connection  
Connect the MONITOR OUT jack from the unit to the  
VIDEO IN jack on the TV using the video cable supplied  
(V).  
S-Video connection  
OPTICAL  
IN  
Connect the S-VIDEO OUT jack on the unit to the S-  
VIDEO IN jack on the TV using the S-Video cable (S).  
Component Video (Color Stream®) connection  
Connect the COMPONENT VIDEO (PROGRESSIVE  
SCAN) jacks from the unit to the corresponding in jacks  
on the TV using an Y Pb Pr cable (C).  
V
S
C
VIDEO  
IN  
S-VIDEO  
IN  
COMPONENT VIDEO /  
PROGRESSIVE SCAN INPUT  
Y
Pb  
Pr  
L
Rear of TV  
7
 
Connections  
Connecting to Antenna  
Connecting to Auxiliary Equipment  
Connect the supplied FM/AM antennas for listening to  
the radio.  
- Connect the AM loop antenna to the AM antenna  
You can use VCR or other unit connected to the AUX  
connector.  
connector.  
- Connect the FM wire antenna to the FM antenna  
connector.  
OPTICAL  
IN  
R
L
FM  
L
A
X
GND  
AM  
R
SPEAKERS  
R
L
FM  
L
A
U
X
GND  
AM  
R
SPEAKERS  
To AUDIO IN  
IN  
OUT  
VIDEO  
To AUDIO OUT  
otes  
AUDIO (L)  
To prevent noise pickup, keep the AM loop antenna  
away from the unit and other component.  
Be sure to fully extend the FM wire antenna.  
After connecting the FM wire antenna, keep it as  
horizontal as possible.  
AUDIO (R)  
VCR (or Auxiliary Device, etc)  
Connect a VCR or auxiliary device, etc to the  
1
AUX connector.  
Select AUX function by turning the FUNCTION  
2 dial on the front panel or pressing the  
AUX/D.INPUT button on the Remote Control.  
“AUX” will be shown on the display window.  
8
 
Connections  
Connecting to Optional Equipment  
Connecting USB  
STOP  
You can use an optical output of a Digital Device to the  
OPTICAL IN connector.  
XTSpro  
EQ  
VOLUME  
FUNCTION  
MICVOL.  
DVD Player (or Digital Device, etc)  
OPTICAL  
OUT  
USB Memory, MP3 Player (or  
Memory Card Reader, etc.)  
Connect the USB port of USB memory (or MP3  
player, etc) to the USB connector on the front  
panel.  
OPTICAL  
N  
1
Select USB function by turning the FUNCTION  
2 dial on the front panel or pressing the USB but-  
Connect an optical output of DVD Player (or  
Digital Device etc) to the OPTICAL IN connec-  
tor.  
ton on the Remote Control.  
“USB” will be shown on the display window.  
1
Select AUX OPT function by turning the FUNC-  
2 TION dial on the front panel or pressing the  
ote  
AUX/D.INPUT button on the Remote Control.  
“AUX OPT” will be shown on the display window.  
Any DivX files in your memory card will not be able to  
be played.  
Speaker System Connection  
Connect the speaker cables to the speaker connector.  
otes  
Be sure to match the speaker  
cable to the appropriate termi-  
nal on the components: + to +  
and – to –. If the cords are  
reversed, the sound will be dis-  
torted and will lack base.  
If you use front speakers with  
low maximum input rating,  
adjust the volume carefully to  
avoid excessive output on the  
speakers.  
OPTICAL  
IN  
R
L
FM  
L
A
U
X
GND  
AM  
R
SPEAKERS  
Connect the Left/Right speaker  
correctly. If it reversed, the  
sound may be distorted.  
9
 
Before Operation  
Volume Adjustment  
Setting the Clock  
• Turn VOLUME knob clockwise to increase the sound  
level, or counterclockwise to decrease it.  
Press CLOCK.  
1
(If the clock requires setting, press and hold CLOCK  
for more than 2 seconds.)  
- The hours display begins to blink.  
• Press VOLUME + to increase the sound level, or use  
VOLUME - to decrease it on the Remote Control.  
Sound Quality Adjustment  
Select a 24 hour cycle or 12 hour cycle by  
pressing . bb/BB > on the front panel.  
• To activate stereo sound  
2
Select a desired sound mode by using the EQ button  
on the front panel or the Remote Control.  
Each time you press the button the setting changes in  
the display window as shown below.  
(12HR)  
or  
(24HR)  
FLAT  
POP  
CLASSIC  
Press SET/CD to confirm the selected hour  
[ [  
JAZZ  
DRAMA  
ROCK  
3
4
5
6
7
cycle.  
Use . bb/BB > on the front panel to set  
the correct hours.  
Press SET/CD .  
• Headphone Jack  
Connect a stereo headphone plug ( 3.5mm) into the  
headphone jack.  
The speakers are automatically disabled when you  
plug in headphones (not supplied).  
[ [  
Use . bb/BB > on the front panel to set  
the correct minutes.  
MUTE  
Press SET/CD and the correct time is shown  
on the display window.  
[ [  
Press MUTE to turn off the sound, press again to restore.  
You can mute your unit in order to answer the telephone.  
The “ ” indicator flashes in the display window.  
ote  
When the clock does not appear in the display  
window, follow as below.  
- In case the clock is set, prese the CLOCK button.  
The clock will be shown in the display window for  
about 5 seconds.  
XDSS (Extreme Dynamic Sound System)  
Press XDSS button repeatedly to reinforce treble and bass.  
XDSS ON XDSS OFF  
- In case the clock is not set, the clock will be blinked in the  
display window for about 1 minute. Set the clock as above.  
MP3 Optimizer  
This function is optimizes compressed MP3 file. It provides  
improvement to the bass sound. Each time you press MP3  
OPT. the setting changes in the following order.  
MP3-OPT ON t MP3-OPT OFF  
Sleep Timer Function  
When the sleep timer is set, the unit automatically turns  
off after the specified time has elapsed.  
To specify the time delay before the power is  
1
turned off, press SLEEP.  
In the display window you can see SLEEP 180 for  
about 5 seconds. This means that the system turns  
off automatically after 180 minutes.  
XTS pro  
Each time you press XTS pro the setting changes in the fol-  
lowing order.  
XTS-P ON XTS-P OFF  
Each time you press SLEEP the setting changes  
2 in the following order.  
SLEEP 180 150 120 908070 6050 40 →  
30 20 10 OFFSLEEP 180...  
To check the remaining time until the power is  
turned off.  
While the sleep function is active press SLEEP  
briefly. The time remaining until the unit turns off is  
displayed for about 5 seconds.  
SPECTRUM Effect  
Each time you press the DISP.MODE button repeatedly  
on the Remote Control, you can check the sprectrum  
change of 6 types in the display window.  
3
ote  
DIMMER  
If you press SLEEP while the sleep time is displayed,  
the SLEEP time is reset.  
This function dims the LED of the front panel by half in  
power-on status .  
Press DIMMER once. The LED (Light-emitting diode) of front  
panel is turned off. If you press it once more, the display win-  
dow will be darken by half. To cancel, press the button again.  
To cancel Sleep Timer setting  
If you wish to stop the function, press the SLEEP button  
repeatedly until “SLEEP 10 ” appears, and then press  
SLEEP once again after “SLEEP 10 ” shows on the display.  
10  
 
Before Operation  
Adjust the volume level by pressing  
. bb/BB > on the front panel.  
Timer Function  
13  
14  
With the TIMER function you can have the radio recep-  
tion, CD play and USB play turned on and off at the  
time desired.  
Press SET/CD .  
[ ]  
” appears in the display window and the timer  
Press CLOCK to check the current time.  
setting has been completed.  
1
For your reference  
Turn the system off.  
The selected timer functions are automatically  
switched on and off at the preset times.  
If you don’t set clock, timer function doesn’t work.  
15  
Press TIMER to enter the timer setting mode.  
TUNER  
t
DVD/CD  
dow in turn.  
For your reference  
tUSB flash in the display win-  
2
To cancel or check the timer  
Each time the TIMER button is pressed you can  
select the timer set or cancel. You can also check the  
timer setting status.  
To activate or check the timer, press the TIMER button  
repeatedly so that “ ” appears in the display window.  
To cancel the TIMER, press the TIMER button repeat-  
edly so that “ ” disappears from the display window.  
If you want to correct the previous memorized TIMER  
setting, press and hold the TIMER button more than 2  
seconds.  
- The previous memorized timer setting for on Time and  
” indicator appears in the display window.  
Press SET/CD when the desired function  
[ ]  
flashes.  
Using Microphone  
3
You can sing to a music source by connecting a  
microphone to the unit.  
4 1. When you select the TUNER function,  
Select the previous memorized preset  
number with . bb/BB > on the front panel  
Connect your microphone to the MIC socket.  
and press SET/CD .  
[]  
” will be shown in the display window.  
1
‘ON TIME’ indicator appears for about 0.5 sec-  
onds in the display window and then disappears.  
2. When you select DVD/CD or USB function,  
‘ON TIME’ indicator appears for about 0.5 sec-  
onds in the display window and then disappears.  
2 Play the music you want.  
Sing along with the accompaniment.  
Adjust the microphone volume by turning MIC  
VOLUME KNOB.  
3
Set the hour to switch on by pressing  
. bb/BB > on the front panel.  
otes  
5
6
7
When not using the microphone, set the MIC volume  
knob to minimum or turn off the MIC and remove the  
microphone from the MIC socket.  
If the microphone is set too near the speaker, a  
howling sound may be produced. In this case, move  
the microphone away from the speaker or decrease  
the sound level by using the MIC volume control.  
If sound through the microphone is extremely loud, it  
may be distorted. In this case, turn the MIC volume  
control toward minimum.  
Press SET/CD to confirm the turn on hour  
[ ]  
time.  
Set the minute to switch on by pressing  
. bb/BB > on the front panel.  
Press SET/CD to confirm the turn on minutes  
[ ]  
time.  
8
‘OFF TIME’ indicator appears for about 0.5 seconds  
in the display window and then disappears.  
To Adjust ECHO Volume  
You can give an echo effect to the sound from the  
microphones.  
Set the hour to switch off by pressing  
. bb/BB > on the front panel.  
9
Press the ECHO VOL. (  
to increase the echo volume or decrease it.  
/
) on the Remote Control  
Press SET/CD .  
[ ]  
10  
11  
12  
Set the minute to switch off by pressing .  
bb/BB > on the front panel.  
Press SET/CD .  
[ ]  
11  
 
Before Operation  
Mini Glossary for Audio Stream &  
Surround mode  
DVD  
CD  
Sound Mode  
You can enjoy surround sound simply by selecting one  
of the pre-programmed sound fields according to the  
program you want to listen to.  
The Dolby Digital surround format lets you enjoy up to 5.1  
channels of digital surround sound from a Dolby Digital  
When DVD is inserted  
You can change the Digital Audio Output mode by  
pressing the AUDIO button on the Remote Control  
during playback. Although the DVD contents differ from  
disc to disc, the following explains the basic operation  
when this feature is used.  
program source. If you play DVDs with “  
” mark, you  
can enjoy even better sound quality, greater spatial accura-  
cy, and improved dynamic range.  
Manufactured under license from Dolby Laboratories.  
“Dolby”, “Pro Logic” and double-D symbol are trademarks  
of Dolby Laboratories.  
Each time you press SOUND button, the “BYPASS  
indicator will only be shown in the display window.  
BYPASS  
When CD is inserted  
Outputs the sound from the front left and right speakers  
and subwoofer.  
Each time you press SOUND button, the sound mode  
of Audio CD is changed on the display window in the  
following order.  
BYPASS STUDIO CLUB HALL THEATER 1 →  
CHURCH BYPASS...  
For your reference  
You can identify the encoding format of program  
software by looking at its packaging.  
- Dolby Digital discs are labelled with the  
logo.  
- Dolby Surround encoded programs are labelled with  
the  
logo.  
ote  
When you play sound tracks with 96kHz sampling frequency,  
the output signals will be converted to 48kHz (sampling fre-  
quency).  
12  
 
Before Operation  
Press or  
to change the setting of an item.  
Caution:  
3 The number buttons can be also be used for setting  
numbers (e.g., title number). For some functions,  
press SELECT/ENTER to execute the setting.  
Before using the Remote Control, press the DVD button to  
select the device to be operated.  
General Explanation  
This manual gives basic instructions for operating the  
unit. Some DVDs require specific operation or allow  
only limited operation during playback.  
Temporary Feedback Field Icons  
Title  
Repeat title  
A - B  
Repeat sequence  
When this occurs, the symbol  
appears on the TV  
screen, indicating that the operation is not permitted by  
the unit or is not available on the disc.  
Resume play from this point  
Action prohibited or not available  
On-Screen Display  
General playback status can be displayed on the TV  
screen. Some items can be changed on the menu.  
Notes  
Some discs may not provide all of the features on the  
on-screen display example shown below.  
If no button is pressed for 10 seconds, the on-screen  
display disappears.  
On-screen display operation  
Press DISPLAY during playback.  
1
Press  
/
to select an item.  
2 The selected item will be highlighted.  
Example: On-Screen Display during playing DVD  
Items  
Selection Method  
Function / Action using  
/
to select item  
Title Number  
Shows the current title number and total number of titles /  
skips to the desired title number.  
/
, Numbers or  
SELECT/ENTER  
, Numbers or  
1 / 3  
Chapter Number  
Time search  
Shows the current chapter number and total number of  
chapters / skips to the desired chapter number.  
/
1 / 12  
SELECT/ENTER  
Shows the elapsed playing time / searches by elapsed  
time.  
0:20:09  
Numbers, SELECT/ENTER  
Audio language  
and Digital Audio  
Output mode  
Shows the current audio soundtrack language,  
encoding method, and channel number / changes the  
setting.  
/
or  
AUDIO  
Subtitle language  
Shows the current subtitle language / changes the set-  
ting.  
/
or  
ABC  
1 ENG  
1 / 3  
SUBTITLE  
Angle  
Shows the current angle number and total number of  
angles / changes the angle.  
/
Sound  
Shows the current sound mode / changes the setting.  
/
or  
Bypass  
SOUND  
13  
 
Before Operation  
Initial Settings  
DISPLAY  
DISPLAY  
By using the Setup menu, you can make various adjust-  
ments to items such as picture and sound. You can also  
set a language for the subtitles and the Setup menu,  
among other things. For details on each Setup menu  
item, see pages 13 to 15.  
TV Aspect  
16  
:
9
Display Mode  
Progressive Scan  
Widescreen  
Off  
To display and exit the Menu:  
Press SETUP to display the menu. A second press of  
SETUP will take you back to initial screen.  
To go to the next level:  
Move  
Select  
TV Aspect DVD  
Press on the Remote Control.  
To go back to the previous level:  
4:3: Select when a standard 4:3 TV is connected.  
16:9: Select when a 16:9 wide TV is connected.  
Press on the Remote Control.  
Display Mode DVD  
General Operation  
Display Mode setting works only when the TV Aspect  
mode is set to “4:3”.  
Press SETUP.  
1
The setup menu appears.  
Letterbox: Displays a wide picture with bands on the  
upper and lower portions of the screen.  
Panscan: Automatically displays the wide picture on  
the entire screen and cuts off the portions that do not fit.  
Use  
/
to select the desired option then  
to move to the second level.  
2 press  
The screen will be shown the current setting for the  
selected item, as well as alternate setting(s).  
Progressive Scan DVD  
Use  
/
to select the second desired option  
to move to the third level.  
3 then press  
Progressive Scan Video provides higher quality pictures  
with less flickering.  
If you are using the Component Video jacks for connec-  
tion to a TV or monitor that is compatible with a pro-  
gressive scan signal, set Progressive Scan to On.  
Use  
/
to select the desired setting then  
4 press SELECT/ENTER to confirm your selection.  
Some items require additional steps.  
Press SETUP or PLAY to exit the setup menu.  
To Turn ON progressive scan:  
5
Connect component out of the DVD to the input of your  
monitor/television, set your television or monitor to  
Component Input.  
LANGUAGE  
LANGUAGE  
1. Select “Progressive Scan” on the DISPLAY menu  
English  
Original  
Off  
OSD  
then press  
.
Disc Audio  
Disc Subtitle  
Disc Menu  
2. Select “On” using the  
/
buttons.  
Original  
3. Press SELECT/ENTER to confirm your selection.  
The confirm menu will appear.  
4. When the confirm menu appears on your screen  
Cancel is highlighted as default. Use the  
buttons to highlight Enter.  
/
Move  
Select  
5. Pressing “Enter” will set the player to Progressive  
scan mode.  
OSD  
Select a language for the Setup menu and on-screen  
display.  
Caution  
Disc Audio / Subtitle / Menu DVD  
Once the setting for progressive scan output is entered,  
an image will only be visible on a progressive scan  
compatible TV or monitor. If you set Progressive Scan  
to On in error, you must reset the unit.  
1) Remove any disc from the unit and close the disc  
tray. See that “NO DISC” is displayed on the display  
window  
Select the language you prefer for the audio track (disc  
audio), subtitles, and the disc menu.  
Original: Refers to the original language in which the  
disc was recorded.  
Other: To select another language, press number buttons  
to enter the corresponding 4-digit number according to the  
language code list on page 26. If you enter the wrong lan-  
guage code, press CLEAR on the Remote Control.  
2) Press and hold STOP ( ) for five seconds then  
x
release it. The video output will be restored to the  
standard setting, and a picture will once again be  
visible on a conventional analog TV or monitor.  
14  
 
Before Operation  
AUDIO  
OTHERS  
OTHERS  
AUDIO  
DivX(R) Registration  
Select  
DRC  
On  
On  
Vocal  
Select  
Move  
Move  
Select  
DivX(R) Registration DivX  
Dynamic Range Control (DRC) DVD  
You can show the DivX DRM (Digital Right  
Management) Registration code for your unit only.  
With the DVD format, you can hear a program’s sound-  
track in the most accurate and realistic presentation  
possible, thanks to digital audio technology. However,  
you may wish to compress the dynamic range of the  
audio output (the difference between the loudest sounds  
and the quietest ones). Then, you may listen to a movie  
at a lower volume without losing dialog intelligibility. Set  
DRC to On for this effect.  
Your registration code is : XXXXXXXX  
Please use this code to register this player with  
the DivX(R) Video On Demand service.  
This will allow you to rent and purchase videos  
using the DivX(R) Video On Demand format.  
The Registration code is used for VOD (Video-On-  
Demand) service agent. You can purchase or rental an  
encrypt movie file.  
Notes  
The DRC function works only during playback of  
Dolby Digital recorded discs.  
The level of Dynamic Range Compression may differ  
depending on the DVD disc.  
Notes  
If you rent the DivX VOD file, it has several options of  
viewing limits as show below.  
Vocal DVD  
Display the number which you can watch the file.  
Set Vocal to On only when a multi-channel Karaoke  
DVD is playing. The karaoke channels on the disc will  
mix into a normal stereo sound.  
This rental video has 7 views left. A view  
ends when you stop playback, play a different  
video, or turn off your player.  
?
Do you want to use one of your 7 views now  
Yes  
No  
The rental has been expired.  
This rental is expired.  
Display the authorization error.  
This video player is not authorized to  
play this video.  
15  
 
Before Operation  
Password (Security Code)  
LOCK (Parental Control)  
You can enter or change password.  
LOCK  
Rating  
Unlock  
1 Select Password on the LOCK menu then press  
2 Follow step 2 as shown left (Rating). “Change” or  
“New” is highlighted.  
.
Password  
Country Code  
****  
RU  
U S  
3 Enter the new 4-digit code, then press  
SELECT/ENTER. Input it again to verify.  
4 Press SETUP to exit the menu.  
Move  
Select  
If you forget your Security Code  
Rating DVD  
If you forget your security code you can clear it using  
the following steps:  
Some movies contain scenes that may not be suitable  
for children to view. Many of these discs contain parental  
control information that applies to the complete disc or to  
certain scenes on the disc. Movies and scenes are rated  
from 1 to 8, depending on the country. Some discs offer  
more suitable scenes as an alternative.  
1 Input the 6-digit number “210499” in the setup menu  
and the security code is cleared.  
2
Enter a new code as described above.  
ote  
The parental control feature allows you to block access  
to scenes below the rating you input, thereby preventing  
your children from being able to view material you  
believe is unsuitable.  
INPUT PASSWD  
When “  
” appears on the TV screen,  
press STOP (x) and then press SETUP to move to the  
setup menu.  
Select “Rating” on the LOCK menu then press  
Country Code DVD  
1
.
Enter the code of the country/area whose standards  
were used to rate the DVD video disc, based on the list  
in the reference chapter.  
To access the Rating, Password and Country  
2 Code features, you must input the 4-digit  
security code you created.  
Select “Country Code” on the LOCK menu then  
If you have not yet entered a security code you are  
prompted to do so.  
1
press  
.
Follow step 2 as shown left (Rating).  
Input a 4-digit code and press SELECT/ENTER.  
Enter it again and press SELECT/ENTER to verify.  
If you make a mistake before pressing  
2
3
Select the first character using  
/
buttons.  
SELECT/ENTER, press CLEAR.  
Select a rating from 1 to 8 using the  
/
Shift the cursor using button and select the  
3 buttons.  
4 second character using  
/
buttons.  
Rating 1-8: Rating one (1) has the most restrictions  
and rating eight (8) is the least restrictive.  
Press SELECT/ENTER to confirm your country  
5 code selection.  
Unlock  
If you select unlock, parental control is not active  
and the disc plays in full.  
ote  
If you set a rating for the player, all disc scenes with  
the same rating or lower are played. Higher rated  
scenes are not played unless an alternate scene is  
available on the disc. The alternative must have the  
same rating or a lower one. If no suitable alternative is  
found, playback stops. You must enter the 4-digit pass-  
word or change the rating level in order to play the disc.  
Press SELECT/ENTER to confirm your rating  
4 selection, then press SETUP to exit the menu.  
16  
 
Operation with DVD  
Playing a DVD  
General Features  
Playback Setup DVD  
ote  
Turn on the TV and select the video input source  
connected to the unit.  
Audio system: Turn on the audio system and select  
the input source connected to the unit.  
Unless stated otherwise, all operations described use  
the Remote Control. Some features may also be  
available in the Setup menu.  
Moving to another TITLE DVD  
Press Z OPEN/CLOSE button to open the disc  
1
tray.  
When a disc has more than one title, you can move to  
another title. Press DISPLAY while playback is stopped  
Load your chosen disc in the tray, with the  
playback side facing down.  
2
then the appropriate number (0-9) or use  
to another title.  
/
to move  
Press Z OPEN/CLOSE button to close the tray.  
3 Playback starts automatically. If playback does not  
start, press PLAY.  
You can play any title by inputting its number while play-  
back is stopped.  
In some cases, the disc menu might appear instead.  
Moving to another CHAPTER/TRACK  
If a menu screen is displayed  
The menu screen may be displayed first after loading a  
DVD which contains a menu.  
DVD  
DivX  
When a title on a disc has more than one chapter or a  
disc has more than one track, you can move to another  
chapter/track as follows:  
Press . or > briefly during playback to select  
the next chapter/track or to return to the beginning of  
the current chapter/track.  
DVD  
Use the  
/
/
/
buttons to select the title/chapter  
you want to view, then press SELECT/ ENTER to start.  
Press TITLE or MENU to return to the menu screen.  
Press . twice briefly to step back to the previous  
chapter/track.  
To go directly to any chapter during DVD playback,  
Notes  
– If parental control is set and the disc is not within the  
rating settings you must input the password.  
(See “LOCK” on page 16.)  
– DVDs may have a region code. Your player will not  
play discs that have a region code different from your  
player. The region code for this player is 1 (one).  
press DISPLAY and press  
ter/track icon. Then, input the chapter/track number or  
use  
/
to select the chap-  
/
.
Search DVD  
DivX  
1 Press m or M during playback.  
The player will now go into SEARCH mode.  
2 Press m or M repeatedly to select the required  
speed: mX2, mX4, mX8, mX16, mX100  
(backward) or MX2, MX4, MX8, MX16,  
MX100 (forward).  
With a DivX, the Search speed changes: mX2,  
mX4, mX8, mX16 (backward) or MX2, MX4,  
MX8, MX16 (forward).  
3 To exit SEARCH mode, press PLAY.  
Still Picture and Frame-by-frame playback  
DVD  
DivX  
1 Press PAUSE/STEP on the Remote Control during  
playback.  
The player will now go into PAUSE mode.  
2 You can advance the picture frame-by-frame by  
pressing PAUSE/STEP repeatedly on the Remote  
Control.  
3 To exit still motion mode, press PLAY.  
17  
 
Operation with DVD  
Zoom DVD  
General Features (continued)  
The Zoom function allows you to enlarge the video  
image and to move through the enlarged image.  
Slow Motion DVD  
1 Press ZOOM during playback or still playback to  
activate the Zoom function.  
1 Press t or T on the Remote Control during  
playback.  
If you press ZOOM repeatedly, the magnification level  
increases up to four steps.  
100% size 400% size 800% size →  
The player will enter SLOW mode.  
2 Use the t or T to select the required speed: t  
1/2, t 1/4, t 1/8 or t 1/16 [(backward) - DVD  
only] or T 1/2, T 1/4, T 1/8 or T 1/16  
(forward).  
1600% size 100% size  
2 Use the  
/
/
/
buttons to move through the  
3 To return to normal PLAY, press PLAY.  
zoomed picture.  
Repeat DVD  
DivX  
ote  
You can play a title/chapter/all/track on a disc.  
The zoom function may not work for some DVDs.  
Press REPEAT during playback to select a desired  
repeat mode.  
DVD  
Marker Search  
You can start playback from a memorized point. Up to  
nine points can be memorized.  
To enter a mark, follow these steps.  
DVD Video Discs - Repeat Chapter/Title/Off  
• Chapter: repeats the current chapter.  
• Title: repeats the current title.  
1 During disc playback, press MARKER when  
playback reaches the spot that you want to  
memorize.  
• Off : does not play repeatedly.  
DivX - Repeat Track/All/Off  
• Track : repeats the current track  
• All : repeats all the tracks on a disc.  
• Off : does not play repeatedly.  
The Marker icon will appear on the TV screen briefly.  
2 Repeat step 1 to enter up to nine Marker points on a  
disc.  
To Recall a Marked Scene  
Repeat A-B DVD  
1 During disc playback, press SEARCH.  
The MARKER SEARCH menu will appear on the screen.  
To repeat a sequence in a title:  
1 Press REPEAT A-B at your chosen starting point.  
“ A - ” appears briefly on the TV screen.  
2 Within 10 seconds, press  
number that you want to recall.  
/
to select a Marker  
2 Press REPEAT A-B again at your chosen end point.  
“A - B” appears briefly on the TV screen, and the  
repeat sequence begins.  
3 Press SELECT/ENTER.  
Playback will start from the Marked scene.  
4 To remove the MARKER SEARCH menu, press  
SEARCH.  
3 To cancel the sequence, press REPEAT A-B.  
To clear a Marked Scene  
Time Search DVD  
1 During disc playback, press SEARCH.  
The Time Search function allows you to start playing at  
any chosen time on the disc.  
The MARKER SEARCH menu will appear on the screen.  
2 Press  
/
to select the Marker number that you  
1 Press DISPLAY during playback. The on-screen  
display appears on the screen.  
The Time Search box shows the elapsed playing time of the  
current disc.  
want to erase.  
3 Press CLEAR.  
The Marker number will be erased from the list.  
4 Repeat steps 2 and 3 to erase additional Marker  
numbers.  
2 Within 10 seconds, press  
/
to select the Time  
Search icon in the on-screen display.  
The “-:--:--” appears in the Time Search box.  
5 To remove the MARKER SEARCH menu, press  
SEARCH.  
3 Within 10 seconds, use the number buttons to enter  
the required start time. Enter hours, minutes, and sec-  
onds from left to right in the box.  
If you enter the wrong numbers, press CLEAR to remove the  
numbers you entered. Then enter the correct numbers.  
4 Within 10 seconds, press SELECT/ENTER to confirm  
the start time.  
Playback starts from the selected time on the disc. If you enter  
an invalid time, playback will continue from the current point.  
18  
 
Operation with DVD  
DVD  
Last Scene Memory DVD  
Special DVD Features  
This player memorizes last scene from the last disc that  
is viewed. The last scene remains in memory even if  
you remove the disc from the player or switch off the  
player. If you load a disc that has the scene memorized,  
the scene is automatically recalled.  
Checking the contents of DVD Video  
discs: Menus  
DVDs may offer menus that allow you to access special  
features. To use the disc menu, press MENU. Then,  
press the appropriate number button to select an option.  
ote  
Or, use the  
/
/
/
buttons to highlight your  
This player does not memorize the scene of a disc if  
you switch off the player before commencing to play the  
disc.  
selection, then press SELECT/ENTER.  
DVD  
Title Menu  
Screen Saver  
1 Press TITLE.  
If the current title has a menu, the menu will appear on the  
screen. Otherwise, the disc menu may appear.  
The screen saver appears when you leave the DVD  
player in Stop mode for about five minutes.  
2 The menu can list camera angles, spoken language  
and subtitle options, and chapters for the title.  
3 To remove the title menu, press TITLE again.  
DVD  
Disc Menu  
Press MENU.  
The disc menu is displayed.  
DVD  
Camera Angle  
If the disc contains scenes recorded at different camera  
angles, you can change to a different camera angle  
during playback.  
1 Press DISPLAY and then press the  
/
to select  
a angle.  
The number of the current angle appears on the display  
window.  
2 Select a desired angle pressing the  
/
buttons.  
Changing the Audio Language DVD  
Press AUDIO repeatedly during playback to hear a  
different audio language or audio track.  
Subtitle DVD  
DivX  
Press SUBTITLE repeatedly during playback to see the  
different subtitle languages.  
ote  
If  
appears, the feature is not available on the disc.  
19  
 
Operation with Audio CD and MP3/WMA Disc  
Playing an Audio CD and MP3/WMA  
CD  
MP3  
WMA  
Repeat Track/All/Off  
You can play a title/chapter/all/track on a disc.  
CD  
MP3  
WMA  
Disc  
1 Press REPEAT when playing a disc. The repeat icon  
appears.  
The unit can play MP3/WMA formatted recordings on  
CD-ROM, CD-R, or CD-RW discs.  
2 Press REPEAT to select a desired repeat mode.  
• Track: repeats the current track  
Audio CD  
• All: repeats all the tracks on a disc.  
• Off(No display): does not play repeatedly.  
Once you insert an audio CD a menu appears on the  
TV screen. Press  
/
to select a track then press  
PLAY or SELECT/ENTER and playback starts.  
CD  
MP3  
WMA  
Search  
0:00:00  
1 / 12  
1 Press m or M during playback.  
Audio CD  
The player will now go into SEARCH mode.  
List  
Track1  
Track2  
Track3  
Track4  
Track5  
Program  
2 Press m or M repeatedly to select the required  
speed: mX2, mX4,mX8 (backward) or MX2,  
MX4, MX8 (forward).  
Track6  
Track7  
Track8  
3 To exit SEARCH mode, press PLAY.  
MP3 / WMA disc compatibility with this player is  
limited as follows:  
• Sampling frequency: within 32 - 48 kHz (MP3),  
within 24 - 48kHz (WMA)  
• Bit rate: within 32 - 320kbps (MP3),  
40 - 192kbps (WMA)  
MP3 / WMA  
1. Press  
/
to select a folder, and press  
SELECT/ENTER to see the folder contents.  
2. Press to select a track then press PLAY or  
SELECT/ENTER. Playback starts.  
/
0:00:00  
1 / 104  
• The player cannot read an MP3/WMA file that has a  
file extension other than “.mp3” / “.wma”.  
• CD-R physical format should be ISO 9660  
• If you record MP3 / WMA files using software that  
cannot create a file system (eg. Direct-CD) it is  
impossible to playback MP3 / WMA files. We rec-  
ommend that you use Easy-CD Creator, which cre-  
ates an ISO 9660 file system.  
MP3 / WMA  
List  
Program  
1-Music1  
2-Music2  
3-Music3  
4-Music4  
5-Music5  
6-Music6  
7-Music7  
• File names should have a maximum of 8 letters and  
must incorporate an .mp3 or .wma extension.  
• They should not contain special letters such as / ?  
* : “ < > l etc.  
• The total number of files on the disc should be less  
than 999.  
otes  
If you are in a file list on the MP3/WMA menu and want  
to return to the Folder list, use the to highlight  
on the stop mode and press SELECT/ENTER.  
/
• Press MENU to move to the next page.  
• On a CD with MP3/WMA file and JPEG file, you can  
switch MP3/WMA and JPEG menu. Press TITLE on  
the stop mode and MP3/WMA or JPEG word on top  
This unit requires discs and recordings to meet cer-  
tain technical standards in order to achieve optimal  
playback quality. Pre-recorded DVDs are automatical-  
ly set to these standards. There are many different  
types of recordable disc formats (including CD-R con-  
taining MP3 or WMA files) and these require certain  
pre-existing conditions (see above) to ensure compat-  
ible playback.  
of the menu is highlighted. Then, use  
/
to select  
MP3/WMA or JPEG then press SELECT/ENTER.  
CD  
MP3  
WMA  
Pause  
1 Press PAUSE/STEP during playback.  
2 To return to playback, press PLAY or press  
PAUSE/STEP again.  
Customers should note that permission is  
required in order to download MP3 / WMA files  
and music from the Internet. Our company has no  
right to grant such permission. Permission should  
always be sought from the copyright owner.  
CD  
MP3  
WMA  
Moving to another Track  
Press . or > briefly during playback to go to the  
next track or to return to the beginning of the current  
track.  
Press . twice briefly to step back to the previous track.  
In case of audio CD, to go directly to any track, enter  
the track number using the numbered buttons (0-9)  
during playback.  
20  
 
Operation with JPEG Disc  
JPEG  
Slide Show  
JPEG  
Viewing a JPEG disc  
Use  
/
/
/
to highlight the  
(Slide Show)  
This unit can play discs with JPEG files.  
Before playing JPEG recordings, read the notes on  
JPEG Recordings on right.  
then press SELECT/ENTER.  
Moving to another File  
JPEG  
Insert a disc and close the tray.  
1
The JPEG menu appears on the TV screen.  
Press . or > once during viewing a picture to  
advance to the next file or to the previous file.  
JPEG  
List  
Preview  
JPEG Folder 1  
JPEG Folder 2  
JPEG Folder 3  
JPEG Folder 4  
JPEG Folder 5  
JPEG Folder 6  
JPEG Folder 7  
JPEG Folder 8  
Still Picture  
JPEG  
1 Press PAUSE/STEP during slide show.  
The player will now go into PAUSE mode.  
2 To return to the slide show, press PLAY or press  
PAUSE/STEP again.  
Press  
/
to select a folder, and press  
2 SELECT/ENTER. A list of files in the folder  
To rotate picture  
JPEG  
appears.  
Press  
/
during showing a picture to rotate the  
picture clockwise or counter-clockwise.  
Tip  
If you are in a file list and want to return to the Folder  
list, use the  
highlight “  
the previous menu screen.  
/
buttons on the Remote Control to  
JPEG disc compatibility with this player is limited  
as follows:  
and press SELECT/ENTER to return to  
• Depending upon the size and number of JPEG files,  
it could take a long time for the DVD player to read  
the disc’s contents. If you don’t see an on-screen  
display after several minutes, some of the files may  
be too large — reduce the resolution of the JPEG  
files to less than 2760 x 2048 pixels and burn  
another disc.  
If you want to view a particular file, press  
3
/
to highlight a file and press  
SELECT/ENTER or PLAY.  
Slide Show starts from the selected file if Speed  
option is not Off.  
While viewing a file, you can press STOP(x) to  
move to the previous menu (JPEG menu).  
• The total number of files and folders on the disc  
should be less than 999.  
Tip  
• Some discs may be incompatible due to a different  
recording format or the condition of disc.  
• Press MENU to move to the next page.  
• There are four Slide Speed options:  
> (Slow), >> (Normal), >>> (Fast) and II (off).  
:
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
Use  
/
/
/
/
to highlight the Speed. Then, use  
• If the files have “.jpe” or “.jpeg” extensions, please  
rename them as “.jpg” file.  
to select the option you want to use then press  
SELECT/ENTER.  
• File names without “.jpg” extension will not be able  
to be read by this DVD player. Even though the files  
are shown as JPEG image files in Windows  
Explorer.  
• If you set Speed option to Off, Slide Show is not  
active.  
21  
 
CD  
MP3  
WMA  
Programmed Playback  
The Program function enables you to store your favorite tracks from any disc in the player memory.  
A program can contain 300 tracks (Audio CD/MP3/WMA).  
Insert a disc.  
Repeat Programmed Tracks  
1
You can play a title/chapter/all/track on a disc.  
Audio CD and MP3/WMA Discs:  
Audio CD or MP3/WMA menu appears as below.  
1 Press REPEAT when playing a disc. The repeat icon  
appears.  
2 Press REPEAT to select a desired repeat mode.  
• Track: repeats the current track  
0:00:00  
1
/
12  
0:00:00  
1
/
104  
MP3  
/
WMA  
Audio CD  
List  
Track1  
Track2  
Track3  
Track4  
Track5  
Program  
Track8  
List  
Program  
Music8  
Music1  
Music2  
Music3  
Music4  
Music5  
Music6  
Music7  
Music16  
Music5  
Music9  
Music1  
Music7  
Music6  
Music3  
Track3  
Track12  
Track7  
Track6  
• All: repeats all the tracks on a disc.  
• Off (No display): does not play repeatedly.  
Track6  
Track9  
Track7  
Track8  
Track1  
Track10  
Erasing a Track from Program List  
1 Use  
/
/
/
to select the track that you wish  
Audio CD Menu  
MP3/WMA Menu  
to erase from the Program list.  
2 Press CLEAR. Or, select “  
(Delete)” icon then  
Press SELECT/ENTER to place the selected track on  
the Program list. Repeat to erase additional tracks on  
the list.  
Select a track on the List.  
2
Press PROGRAM. Or, select “  
(Add)” icon  
Erasing the Complete Program List  
3 then SELECT/ENTER to place the selected track  
on the Program list. Repeat to place additional  
tracks on the list.  
Select “  
(Del all)”, then press SELECT/ENTER. The  
complete Program for the disc is erased.  
ote  
ote  
You can add all tracks in the disc. Select “  
icon then press SELECT/ENTER.  
(Add All)”  
The programs are also cleared when the disc is removed.  
To resume normal playback from programmed playback  
Select the track you want to start playing on the  
4 Program list.  
Select a track on the List then press SELECT/ENTER.  
“PROG.” disappears from the display window.  
Tip  
Press MENU to move to the next page.  
Press PLAY or SELECT/ENTER to start.  
5 Playback begins in the order in which you pro-  
grammed the tracks and “PROG.” appears on the  
display window. Playback stops after all of the  
tracks on the Program list have played once.  
22  
 
Operation with DivX Disc  
The unit can play the DivX files.  
DivX disc compatibility with this player is limited  
as follows:  
Insert a disc and close the tray.  
1
The DivX menu appears on the TV screen.  
• Available resolution size of the DivX file is under  
720x576 (W x H) pixel.  
0:00:00  
DIVX  
1 / 12  
• The file name of the DivX subtitle is available by  
20-40 characters (differs from language).  
List  
Movie Folder 1  
Movie Folder 2  
Movie Folder 3  
Movie Folder 4  
Movie Folder 5  
Movie Folder 6  
Movie Folder 7  
Movie Folder 8  
• If there is impossible code to express in the DivX  
file, it may be displayed as " _ " mark on the dis-  
play.  
• If the number of the screen frame is over 30 per  
1 second, this unit may not operate normally.  
• If the video and audio structure of recorded file  
is not interleaved, either video or audio is out-  
putted.  
Press  
/
to select a folder, and press  
2 SELECT/ENTER to see the folder contents.  
• If the file is recorded with GMC, the unit sup-  
ports some of 1-point of the record level.  
Tip  
If you are in a file list and want to return to the Folder  
GMC?  
*
list, use the  
highlight “  
the previous menu screen.  
/
buttons on the Remote Control to  
and press SELECT/ENTER to return to  
GMC is the acronym for Global Motion Compensation. It  
is an encoding tool specified in MPEG4 standard. Some  
MPEG4 encoders, like DivX or Xvid, have this option.  
There are different levels of GMC encoding, usually called  
1-point, 2-point, or 3-point GMC.  
If you want to view a particular file, press  
3
/
to highlight a file and press  
SELECT/ENTER or PLAY.  
Playback starts.  
Playable DivX subtitle file  
z ".srt ", ".smi ", ".sub ".  
Press STOP(x) to exit.  
Playable DivX file  
4
z ".avi ", ".mpg ", ".mpeg "  
otes  
Playable Codec format  
Be sure to select “SUBTITLE ON” mode by pressing the  
subtitle file every time before playing a DivX file .  
When the subtile has more than two languages in the file,  
original subtile is only available.  
The DivX files in your memory card will not be able to be  
play.  
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",  
"MP43 ", "3IVX ", "MP42 ".  
Playable Audio format  
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".  
• Sampling frequency: within 32 - 48 kHz (MP3),  
within 24 - 48kHz (WMA)  
DivX  
Display  
• Bit rate: within 32 - 320kbps (MP3),  
40 - 192kbps (WMA)  
Press DISPLAY during playback.  
General playback status can be displayed on the TV  
screen.  
23  
 
Operation with RADIO  
Presetting the radio stations  
Listening to the radio  
Press TUNER/BAND on the Remote Control to  
show either FM or AM in the display window. Or  
Turn FUNCTION dial on the fornt panel.  
The last received station is tuned in.  
You can preset 50 stations for FM and AM.  
Before tuning, make sure that you have turned the vol-  
ume down to the minimum level.  
1
Press TUNER/BAND on the Remote Control to  
show either FM or AM in the display window. Or  
Press PRESET (-/+) on the Remote Control  
repeatedly to select the preset station you want.  
Each time you press this button, the unit tunes in  
the next preset station.  
1
Turn FUNCTION dial on the fornt panel.  
Every time you press this button, AM and FM  
changes alternately.  
2
Select a station you want by pressing  
TUN. (-/+) buttons.  
Adjust the volume by rotating VOLUME  
2
3
/
CONTROL KNOB (or pressing VOLUME (  
on the Remote Control) repeatedly.  
)
otes  
To listen to non-preset radio stations  
• For manual tuning, see “Manual Tuning”.  
• For automatic tuning, see “Automatic Tuning”.  
Automatic Tuning  
Press TUN. (-/+) for more than 0.5 second.  
- Scanning stops when the unit tunes in a station.  
Manual Tuning  
To select a preset radio station directly  
You can use the number buttons on the Remote Control  
to select a preset radio station directly.  
Press TUN. (-/+) briefly and repeatedly.  
Press PROG./MEMO. on the Remote Control.  
For example, to listen to preset station 4, press 4 on the  
Remote Control. To listen to preset station 19, press 1  
then 9 (within 3 seconds).  
A preset number will flash in the display window.  
3
4
5
Press PRESET (-/+) on the Remote Control to  
select the preset number you want.  
Press PROG./MEMO. again.  
The station is stored.  
To turn the radio off  
Press POWER ( ) to turn off the unit or select another  
function mode (DVD/CD, AUX or USB).  
6 Repeat steps 1 (or 2) to 5 to store other stations.  
For your reference  
If a FM program is noisy  
Press MONO/ST. repeatedly so that “STEREO”  
disappears in the display window. There will be no  
stereo effect, but the reception will improve. Press  
MODE/RIF again to restore the stereo effect.  
To clear all memorized stations  
Press and hold PROG./MEMO. on the Remote Control  
for about two seconds, “CLEAR ALL” appears in the dis-  
play window and then press PROG./MEMO. on the  
Remote Control, the stations are cleared.  
To improve reception  
Reposition the supplied antennas.  
For your reference  
If all stations have already been entered, “FULL”  
message will appear in the display window for a  
moment and then a preset number will flash.  
To change the preset number, follow the steps 4-5 .  
To recall preset numbers  
Press and hold PRESET (-/+) on the Remote Control  
until the desired preset number appears or press the  
button repeatedly.  
24  
 
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Cause  
Correction  
Symptom  
No power.  
• The power cord is disconnected.  
• Plug the power cord into the wall outlet  
securely.  
• No disc is inserted.  
• Insert a disc. (Check that the DVD or, audio  
CD indicator in the DVD display is lit.)  
The power is on, but the  
unit does not work.  
• The TV is not set to receive DVD signal out-  
put.  
• Select the appropriate video input mode on  
the TV so the picture from the unit appears  
on the TV screen.  
No picture.  
• The video cable is not connected securely.  
• The connected TV power is turned off.  
• Connect the video cable into the jacks  
securely.  
• Turn on the TV.  
• The equipment connected with the audio  
cable is not set to receive DVD signal output.  
• Select the correct input mode of the audio so  
you can listen to the sound from the unit.  
There is no sound or only  
a very low-level sound is  
heard.  
• Connect the audio cable into the jacks  
securely.  
• The audio cables are not connected securely  
.
• Turn on the equipment connected with the  
audio cable.  
• The power of the equipment connected with  
the audio cable is turned off.  
• Replace it with new one.  
• Clean the disc.  
• The audio connecting cord is damaged.  
• The disc is dirty.  
The playback picture is poor.  
• Insert a disc. (Check that the DVD, or audio  
CD indicator in the DVD display is lit.)  
The unit does not start  
playback.  
• No disc is inserted.  
• Insert a playable disc. (Check the disc type,  
color system and Regional code.)  
• An unplayable disc is inserted.  
• Place the disc with the playback side down.  
• The disc is placed upside down.  
• Place the disc on the disc tray correctly  
inside the guide.  
• The disc is not placed within the guide.  
• Clean the disc.  
• The disc is dirty.  
• Press the SET-UP button to turn off the menu  
screen.  
• A menu is on the TV screen.  
• Cancel the Rating function or change the rat-  
ing level.  
• The Rating level is set.  
• The plugs and jacks are dirty.  
• The disc is dirty.  
• Wipe them with a cloth slightly moistened  
with alcohol.  
Severe hum or noise is  
heard.  
• Clean the disc.  
• Connect the speakers and components  
securely.  
• The speakers and components are  
connected poorly.  
• Move your TV away from the audio compo-  
nents.  
• The unit is located with too close to the TV.  
• Connect the antenna securely.  
• The antenna is positioned or connected  
poorly.  
Radio stations cannot be  
tuned in.  
• Adjust the antennas and connect an external  
antenna if necessary.  
• Tune in the station manually.  
• The signal strength of the stations is too  
weak (when tuning in with automatic tuning).  
• Preset the stations.  
• No stations have been preset or preset sta-  
tions have been cleared (when tuning by  
scanning preset stations).  
The Remote Control does  
not work properly.  
• Point the Remote Control at the remote  
sensor of the unit.  
• The Remote Control is not pointed at the  
remote sensor of the unit.  
• Operate the Remote Control within about  
23 ft (7 m).  
• The Remote Control is too far from the unit.  
• Remove the obstacle.  
• There is an obstacle in the path of the  
Remote Control and the unit.  
• Replace the batteries with new ones.  
• The batteries in the Remote Control are  
exhausted.  
25  
 
Language Code List  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
7074  
Language  
Finnish  
French  
Code  
7073  
7082  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
7678  
7684  
Language  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Code  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Tamil  
Tatar  
Hebrew  
Hindi  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
8373  
8375  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Sindhi  
Kirghiz  
Korean  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Lingala  
Singhalese  
Slovak  
Lithuanian  
Country Code List  
Choose a country code from this list.  
Country  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Code  
AF  
AR  
AU  
AT  
Country  
Ethiopia  
Fiji  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Islands  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
Code  
ET  
FJ  
Country  
Malaysia  
Maldives  
Mexico  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
NL  
AN  
NZ  
NG  
NO  
OM  
PK  
Country  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Code  
SA  
SN  
SG  
SK  
SI  
FI  
FR  
DE  
GB  
GR  
GL  
HM  
HK  
HU  
IN  
ID  
IL  
IT  
JM  
JP  
Monaco  
BE  
BT  
Mongolia  
Morocco  
Nepal  
Netherlands  
Dutch Antilles  
New Zealand  
Nigeria  
ZA  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
KR  
ES  
LK  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Norway  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
PA  
PY  
PH  
PL  
PT  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
KE  
KW  
LY  
Kuwait  
Libya  
Luxembourg  
RO  
El Salvador  
LU  
Zimbabwe  
26  
 
Specifications  
General  
Power supply  
Refer to the main label.  
Power consumption  
Mass  
70 W  
4.0 kg  
External dimensions (W x H x D)  
187 X 255 X 257 mm  
Tuner/Amplifier  
FM Tuning Range  
Intermediate Frequency  
Signal to Noise Ratio  
Frequency Response  
AM Tuning Range  
Intermediate Frequency  
Signal to Noise Ratio  
Frequency Response  
Output Power  
87.5 - 108.0 MHz or 65 -74 MHz, 87.5 -108.0 MHz  
10.7 MHz  
60/55 dB (Mono/Stereo)  
60 - 10000 Hz  
522 - 1620 kHz or 520 - 1720 kHz  
450 kHz  
34 dB  
120 - 1800 Hz  
80 W + 80 W (6, THD 10 %)  
0.5 %  
T.H.D  
Frequency Response  
Signal-to-noise ratio  
40 - 20000 Hz  
80 dB  
DVD/CD player  
Frequency response (audio)  
Signal-to-noise ratio (audio)  
Signal-to-noise ratio (video)  
Dynamic range (audio)  
Video output  
40 - 20000 Hz  
More than 75 dB (1 kHz)  
More than 55 dB (1 kHz)  
More than 80 dB  
1.0 V (p-p), 75 Ω  
S-video output  
(Y) 1.0 V (p-p), 75 Ω  
(C) 0.3 V (p-p), 75 Ω  
Component Video output  
(Y) 1.0 V (p-p), 75 Ω  
(Pb)/(Pr) 0.7 V (p-p), 75 Ω  
Speakers  
Speaker Name  
Type  
Impedance  
Font Speaker (L/R)  
Bass Reflex 3Way 4Speaker  
6 Ω  
Frequency Response  
Sound Pressure Level  
Rated Input Power  
Max. Input Power  
Net Dimensions (W x H x D)  
Net Weight  
60 - 20000 Hz  
82 dB/W (1m)  
80 W  
160 W  
162X320X258 mm  
4.0 kg  
27  
 
LG Electronics, Inc.  
Limited Warranty - USA  
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or  
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date  
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original pur-  
chaser of the product and effective only when used in the United States, excluding U.S. Territories.  
WARRANTY PERIOD:  
HOW SERVICE IS HANDLED:  
LABOR: 90 days from the Date of Purchase.  
Call 1-800-243-0000 for instructions on getting the  
defective unit repaired or replaced.  
PARTS: One Year from the Date of Purchase.  
Please retain dated sales receipt and your box to  
return the unit to LG for repair or replacement.  
* Parts replaced are warranted for the remaining portion  
of the original warranty period.  
Shipping both ways will be paid by LG during the first 90  
days of the Warranty Period. During the remainder of the  
Warranty Period (91-365days), you pay inbound shipping  
charges and LG pays return shipping charges.  
Visit our website at: http://www.lgservice.com  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,  
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED  
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELEC-  
TRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES  
OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST  
REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED  
IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential dam-  
ages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty  
gives you specific legal rights and you may also have other rights that may vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,  
maintenance or failure to maintain, or separate system components; and  
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside  
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,  
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or  
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer  
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.  
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.  
CUSTOMER INTER-ACTIVE CENTER NUMBERS:  
For nearest Authorized Service Center, Where to buy,  
Product Assistance, or Customer Assistance  
Call 1-800-243-0000 (24 hours a day, 365 days per year)  
and select appropriate options from the menu.  
Or visit our website at http://www.lgservice.com  
LG ELECTRONICS U.S.A., INC.  
1000 SYLVAN AVENUE  
P/N : 3834RH0133E  
Issue O  
ENGLEWOOD CLIFFS, NJ  
Printed in China  
 

KTI Networks Network Card KS 115FM V User Manual
LG Electronics Microwave Oven LMV2083 User Manual
Life Fitness Bicycle LCSR30 0XXX 01 User Manual
Lincoln Electric Welding System IM826 A User Manual
Lowrance electronic GPS Receiver LCX 17M User Manual
Makita Impact Driver 6934FDWDE User Manual
Makita Mobility Scooter HK1820 User Manual
Makita Planer M102 User Manual
Metrologic Instruments Scanner MS2221 User Manual
Michelin Automobile Parts LIGHT TRUCK TIRE User Manual