Microsoft Network Card MN 130 User Manual

M
,
users guide.  
Microsoft® Broadband Networking  
|
PCI Adapter MN-130  
 
contents.  
1
Introduction ........................................................................................ 1  
Do You Have Everything You Need to Add a Computer to  
Your Network? ....................................................................................... 1  
Your Adapter and Its Connections ....................................................... 2  
About Your PCI Adapter ........................................................................ 3  
Wake-On-LAN Capability ....................................................................... 4  
About Ethernet Connections ................................................................ 5  
Straight-Through and Crossover Cables .......................................... 6  
Connecting to Broadband Modems ................................................. 7  
2
Planning .............................................................................................. 7  
Which Setup Method Best Matches Your Network?  
I want to add another computer to an existing network  
that has a base station ..................................................................... 7  
I want to connect two computers directly to each other ............... 8  
I want to connect three or more computers by using a switch  
or hub .................................................................................................. 9  
I want to connect another computer to a Home Phone Line  
Network or Power Line Communication Network......................... 10  
I have already connected my adapter and have not yet  
installed the software ..................................................................... 10  
3
4
Setting Up .........................................................................................11  
Before You Begin ................................................................................. 11  
Typical Setup .......................................................................................12  
Computer-to-Computer Setup ............................................................ 16  
Setting Up an Adapter by Using Plug and Play................................. 19  
Network Tasks .................................................................................. 21  
Log On to Your Workgroup.................................................................. 21  
Perform Common Networking Tasks.................................................22  
Allowing Access to an Internet Connection...................................22  
Allowing Access to Files and Folders .............................................23  
Allowing Access to Printers .............................................................26  
Sharing Other Peripheral Devices .................................................. 27  
Reading E-Mail Messages on Your Network ................................. 27  
Playing Games on Your Network and on the Internet ..................28  
Secure Your Network ..........................................................................29  
Protect Your Network from Computers Viruses ...............................29  
Protect Your Network from Hackers ..................................................30  
 
5
Monitoring ........................................................................................ 31  
View the Status of Your Computer ....................................................32  
View the Status of Your Network Connection ..................................32  
View the Status of Your Broadband Internet Connection ...............33  
View the Status of Other Network Devices.......................................33  
View and Change Network Settings ..................................................33  
Customize the Broadband Network Utility .......................................34  
Update Software, Drivers, and Firmware..........................................34  
6
Troubleshooting ............................................................................... 35  
Setup and Hardware Problems .........................................................35  
Network and Internet Problems ........................................................ 37  
File and Printer Sharing Problems .................................................... 41  
Reference.......................................................................................... 43  
Getting Help .........................................................................................43  
Visit Us on the Web .........................................................................43  
Click Help in the Broadband Network Utility.................................43  
Technical Support ............................................................................43  
Regulatory Information ...................................................................... 44  
United States Radio and TV Interference Regulations ............... 44  
Canadian Radio Communication Regulations............................. 44  
Limited Warranty .................................................................................45  
Technical Specifications ..................................................................... 47  
System Requirements ........................................................................ 47  
Glossary............................................................................................. 49  
 
introduction.  
Introducing the Broadband  
Networking PCI Adapter  
Congratulations on your purchase of the Microsoft® Broadband  
Networking PCI Adapter. You can use the adapter to connect any  
personal computer with an available PCI card slot to a new or  
existing Ethernet network.  
Networked computers let you:  
O
Share a broadband Internet connection.  
O
Share files, printers, and other peripheral devices.  
O
Communicate and play games with others on the network or on  
the Internet.  
This chapter describes your PCI adapter and explains how to  
connect it to your network.  
Do You Have Everything You Need to Add a  
Computer to Your Network?  
Included in the Box:  
User’s Guide  
Setup CD-ROM  
PCI Adapter  
Install This First!  
(MN-130)  
Also Required (but not included in the box):  
O
Straight-through or crossover Ethernet cable (depending on your  
configuration)  
O
System documentation from your computer’s manufacturer  
Optional:  
O
A Wake-On-LAN cable (not included)  
This is necessary only if you want to use the Wake-On-LAN  
feature on an older computer. See “Wake-On-LAN Capability”  
later in this chapter for more information.  
 
Your Adapter and Its Connections  
Your PCI adapter is connected from within your computer to your  
broadband modem or existing network by an Ethernet cable. An  
example network configuration is shown in the following diagram.  
Active Internet Connection  
Broadband Modem  
(DSL or Cable)  
Base Station  
(Router or Gateway)  
Computer with  
PCI Adapter  
There are also other ways to set up your adapter. For an overview  
of common setup scenarios, see Chapter 2. For detailed setup  
instructions, see Chapter 3.  
2
Microsoft Broadband Networking PCI Adapter User’s Guide  
 
About Your PCI Adapter  
Your PCI adapter is installed in a standard PCI slot inside your  
computer, secured by a metal mounting bracket. The following  
diagram shows the layout of the adapter and the location of the  
Ethernet port, status indicator light, and Wake-On-LAN connector.  
Mounting Bracket  
Wake-On-LAN  
Connector  
Link/Activity  
Light  
PCI Connector  
Ethernet  
Port  
PCI Adapter  
Chapter 1: Introduction  
3
 
After you have completed the hardware and software setup of your  
PCI adapter, the indicator light visible through the adapter  
mounting bracket provides feedback about network connectivity  
and data-transmission speed. As shown in the following table, the  
light indicates one of several network states:  
Light Status:  
The PCI Adapter Is:  
Off  
Not connected to an active network.  
Solid orange  
Blinking orange  
Solid green  
Blinking green  
Connected to a 10base-T network running at 10 Mbps.  
Activity detected over the 10base-T network.  
Connected to a 100base-T network running at 100 Mbps.  
Activity detected over the 100base-T network.  
Wake-On-LAN Capability  
The Microsoft Broadband Networking PCI Adapter includes a Wake-  
On-LAN (WOL) feature. WOL technology enables each networked  
computer to be “awakened” from a sleep or powered-down state,  
allowing it to be accessed from another computer connected to  
your local area network (LAN).  
When WOL is enabled on a computer, the PCI adapter is powered  
and monitoring your network. If another computer or device sends  
a message to or tries to access shared files on the WOL-enabled  
computer, the PCI adapter tells the computer to power up its other  
components.  
By using WOL, you can greatly reduce this computer’s power  
consumption while still allowing its shared files and printers to be  
accessed over your network.  
On most computers, Wake-On-LAN capability can be enabled  
through the computer’s BIOS. Some computers might require a  
separate, 3-pin WOL cable, available at most computer stores.  
To determine whether your computer can take advantage of  
Wake-On-LAN features without an extra cable, see your computer  
documentation. If your computer lists PCI 2.2 compliance as one of  
its system features, you should not need to purchase a WOL cable.  
4
Microsoft Broadband Networking PCI Adapter User’s Guide  
 
About Ethernet Connections  
Ethernet is the most commonly used wired network protocol, with  
connection speeds of 10 Mbps, 100 Mbps, or higher. Your USB or  
notebook adapter will transmit data at either 10 or 100 Mbps. The  
adapter’s auto-negotiation feature automatically determines the rate  
of your network connections and uses the fastest speed available.  
As you set up your network, keep in mind that power outlets,  
fluorescent lights, power supplies, and coiled or extra-long cables  
can interfere with Ethernet transmission and also  
produce interference.  
Use Ethernet cables to connect your adapter to devices on your  
network. Any Ethernet-compatible network device will have one or  
more Ethernet ports. Some examples of network devices are:  
O
Routers, gateways, or base stations, such as the Microsoft  
Broadband Networking Wired Base Station  
O
Broadband modems  
O
Computers with Ethernet adapters  
O
Ethernet switches and hubs  
Network components such as your adapter are connected to one  
another by Ethernet cables. An Ethernet cable resembles a phone  
cord, but has larger connectors at each end. To determine whether  
a cable is an Ethernet or phone cable, you can count the number of  
wires or contacts visible in the connector at either end of the cable.  
Ethernet (RJ-45) connectors and cables contain eight wires, and  
phone (RJ-11) connectors contain either four or six wires.  
RJ-45 Ethernet  
(8 wires)  
RJ-11 Telephone  
(4 or 6 wires)  
Chapter 1: Introduction  
5
 
Straight-Through and Crossover Cables  
Data is sent and received through specific wires within an Ethernet  
cable. Depending on the arrangement of its sending and receiving  
wires, an Ethernet cable is either a “straight-through” type or a  
“crossover” type. The following diagram demonstrates how to  
differentiate between the two types.  
In a straight-  
through cable,  
the order of the  
colored wires is the  
same at both ends.  
Straight-Through  
Ethernet Cable  
In a crossover  
Crossover  
Ethernet Cable  
cable, the order of  
the colored wires  
is different at  
both ends.  
Your adapter supports both straight-through and crossover cables.  
For more information on the type of cable you need, see Chapter 2.  
Connecting to Broadband Modems  
When you connect your adapter to a broadband modem, it is  
important to use either the cable that came with your modem or  
the same type of cable. Many modems use a crossover cable to  
connect to the network. If you are unsure about the type of Ethernet  
cable to use, see the documentation for your broadband modem.  
6
Microsoft Broadband Networking PCI Adapter User’s Guide  
 
planning.  
You can use your Microsoft® Broadband Networking Ethernet  
adapter within an existing network or to create a new network.  
This chapter will help you locate setup instructions for your  
network configuration.  
2
Planning Your Network  
Which Setup Option Best Matches Your Network?  
The following options describe common ways to use your Ethernet  
adapter. Select the one that best matches your networking goals.  
Option A:  
I want to add another computer to an existing network  
that has a base station (gateway or router).  
If your computers meet all of the following conditions, see the  
Typical Setup method in Chapter 3 to set up the adapter.  
O
You have an existing Ethernet network that has a base station  
(gateway or router), a broadband modem, and an active  
Internet connection.  
O
The computer you want to add has an available PCI slot.  
After you set up the adapter by using Option A, your network will  
resemble this diagram:  
Active Internet Connection  
Broadband Modem  
(DSL or Cable)  
Base Station  
(Gateway or Router)  
Computer with  
PCI Adapter  
Installing the software  
on this computer  
configures the adapter.  
 
Security Considerations for Option A  
In this configuration, your networked computers use a base station  
(gateway or router) to connect to the broadband modem and,  
indirectly, the Internet. A base station can help provide security for  
your network by using a hardware firewall or Network Address  
Translation (NAT) technology. It is important to enable the  
protection provided by your network to prevent security problems.  
For more information about security, see chapter 4.  
Option B:  
I want to connect two computers directly to each other.  
Your adapter can be used to network computers by using a “peer-  
to-peer” or “computer-to-computer” configuration.  
If your computers meet all of the following conditions, use the  
Computer-to-Computer Setup method in Chapter 3.  
O
One computer has an available PCI slot for your new PCI  
adapter.  
O
A second computer already has an installed Ethernet adapter  
(or internal Ethernet card).  
O
You have a crossover Ethernet cable for connecting the two  
computers.  
After you set up the adapter by using Option B, your network will  
resemble this diagram:  
Computer with  
PCI adapter  
Computer with  
installed Ethernet  
adapter (notebook  
adapter shown)  
Security Considerations for Option B  
You can access the Internet by connecting one computer to your  
broadband modem and sharing the connection with the other  
computers by using Internet Connection Sharing (ICS) software.  
For more information about ICS, see Windows Help.  
Any network that connects to the Internet needs protection from  
hackers and viruses. You can use firewall software, such as  
Internet Connection Firewall that comes with Windows XP, to help  
protect your network from unwanted intrusions.  
If your network is not connected to the Internet, you do not need to  
worry about protecting your network from Internet intrusions.  
8
Microsoft Broadband Networking PCI Adapter User’s Guide  
 
Option C:  
I want to connect three or more computers by using a  
switch or hub.  
You can also create a computer-to-computer network of more than  
two computers by connecting them through a switch or hub.  
If your computers meet all of the following conditions, use the  
Computer-to-Computer Setup method in Chapter 3.  
O
One computer has an available PCI slot for your new PCI adapter.  
O
All other computers already have an installed Ethernet adapter  
(or internal Ethernet card).  
O
You have one or more switches or hubs, with enough available  
ports to connect each computer in the network.  
O
You have a straight-through Ethernet cable for each computer on  
the network.  
After you set up the adapter by using Option C, your network will  
resemble this diagram:  
Computer with  
PCI adapter  
Switch or Hub  
Computers with  
installed Ethernet  
adapters  
Security Considerations for Option C  
You can access the Internet by connecting one computer to your  
broadband modem and sharing the connection with the other  
computers by using Internet Connection Sharing (ICS) software. For  
more information about ICS, see Windows Help.  
Any network that connects to the Internet needs protection from  
hackers and viruses. You can use firewall software, such as  
Internet Connection Firewall that comes with Windows XP, to help  
protect your network from unwanted intrusions.  
If your network is not connected to the Internet, you do not need to  
worry about protecting your network from Internet intrusions.  
Chapter 2: Planning  
9
 
Option D:  
I want to connect another computer to a Home Phone  
Line (HomePNA) Network or Power Line Communication  
(PLC) Network.  
To add a computer to a HomePNA or PLC network by using a  
Microsoft Broadband Networking Ethernet adapter, you need to  
purchase a HomePNA-to-Ethernet or PLC-to-Ethernet adapter. For  
more information about connecting to this kind of network, see the  
documentation for your HomePNA or PLC network or contact the  
manufacturer’s support services.  
To set up your adapter on a HomePNA or PLC network, see  
“Connecting an Adapter Using Plug and Play” in Chapter 3. You do  
not need to run the Setup Wizard, but you will need to configure  
your network settings on the newly networked computer.  
Security Considerations for Option D  
Any network that connects to the Internet needs protection from  
hackers and viruses. How you decide to protect your HomePNA or  
PLC network depends on how the network connects to your  
broadband modem and to the Internet.  
Check that your networking hardware includes a firewall or Network  
Address Translation (NAT) software between all networked  
computers and the Internet.  
Option E:  
I have already connected my adapter and have not yet  
installed the software.  
If you have already connected the adapter and have not yet  
installed the software, or you do not want to run the Setup Wizard,  
see “Setting Up an Adapter by Using Plug and Play” in Chapter 3 for  
setup instructions.  
10 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
setting up.  
3
Installing, Connecting, and  
Configuring Your Adapter  
Your Microsoft® Broadband Networking Ethernet adapter can be set  
up in various ways, depending on how your existing network is  
configured. The instructions in this chapter will guide you through  
the process of setting up your adapter.  
Before You Begin  
Before you install your PCI adapter, make sure that you have the  
following items at the computer:  
Included in the Box:  
O
Microsoft Broadband Networking PCI Adapter  
O
User’s Guide  
O
Setup CD-ROM  
Also Required (but not included in the box):  
O
Ethernet cable  
O
System documentation from your computer’s manufacturer  
Optional:  
O
Network settings provided by your Internet service provider  
(ISP). You might need this information during setup, depending  
on how you install and configure your adapter.  
Microsoft Windows® Setup CD-ROM. This might be necessary if  
O
you need to install any additional Windows networking  
components during setup and configuration.  
O
A Wake-On-LAN cable. This optional cable is purchased  
separately and is necessary only if you want to use the Wake-  
On-LAN feature on an older computer. For more information,  
see Chapter 1.  
 
Note  
Typical Setup  
Follow the detailed instructions beginning on the next page if your  
existing network configuration matches all of the following  
conditions:  
If your computers are  
running Microsoft Windows  
XP or Windows 2000, you  
must be a member of the  
Administrator group to set  
up a network. If you are not  
logged on as an  
administrator, click Start,  
click Log Off, and then  
press CTRL+ALT+DELETE.  
Log on again with an  
administrator’s name and  
password.  
O
You have an existing Ethernet network that has a base station  
(gateway or router), a DSL or cable modem, and an active  
Internet connection.  
O
The Windows-based computer you want to add has an available,  
high-powered USB port or a PC Card slot, and the computer is  
not already connected to another network.  
See the setup instructions later in this chapter if:  
O
Your network is configured in any other way, or  
O
You have already connected your adapter and have not yet  
installed the adapter software.  
After you set up your adapter, your network will resemble the  
following diagram.  
Active Internet Connection  
Broadband Modem  
(DSL or Cable)  
Base Station  
(Gateway or Router)  
Computer with  
PCI Adapter  
Installing the software  
on this computer  
configures the adapter.  
12 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
Step 1: Install the Software  
1. Insert the Setup CD-ROM into the CD-ROM drive of the computer  
that you want to connect to your network. If the Setup Wizard  
does not start automatically after a few seconds, double-click  
My Computer, double-click the drive that contains your Setup  
CD-ROM, and then double-click Setup or Setup.exe.  
2. In the Setup Wizard, do the following:  
O
When the wizard asks which device you are installing, click  
Network Adapter.  
O
When the wizard asks which network adapter you are  
installing, click PCI Adapter.  
3. When the wizard asks you to specify how you want to use your  
adapter, select the option that best describes your existing  
network and how you will connect to it.  
4. When the wizard asks you to install the PCI adapter on your  
computer, shut down your computer by clicking Close.  
5. After your computer shuts down completely, proceed to Step 2.  
Step 2: Install the Adapter in Your Computer  
1. After your computer shuts down completely, disconnect the  
power cord from the back of the computer to prevent shock.  
2. Remove the cover from your computer. For instructions, see your  
computer’s documentation.  
3. Locate an available PCI slot on your computer’s motherboard.  
4. Remove the protective bracket from the PCI slot.  
5. Insert the PCI adapter into the slot as shown in the  
diagram, being careful to:  
O
Line up the connectors on the PCI adapter with the PCI slot,  
and press evenly on the top of the card until it is securely  
connected to the motherboard.  
O
Line up the mounting bracket with the appropriate opening  
on the back of your computer.  
Chapter 3: Setting Up 13  
 
Mounting  
Bracket  
Caution  
Electronic components are  
sensitive to static electricity.  
Always ground yourself before  
touching the PCI adapter or  
any other internal components  
of your computer.  
PCI Connectors  
PCI Slot  
6. Screw the bracket of the PCI adapter securely to your  
computer’s case.  
7. If your computer does not support PCI 2.2 connectivity and you  
want to install Wake-On-LAN capability, do the following:  
O
Connect one end of the Wake-On-LAN cable (purchased  
separately) to the connector on the top edge of the PCI adapter.  
Caution  
O
Connect the other end to the Wake-On-LAN connector on  
Before you attempt to insert  
your PCI adapter into the PCI  
slot, make sure that the pin  
configuration of the slot  
matches that of the  
your motherboard.  
For more information about the location of this connector, see  
your computer’s documentation.  
connectors on the bottom of  
the adapter.  
8. Replace the cover on your computer.  
Step 3: Connect Your PCI Adapter to the Network  
1. Connect one end of the Ethernet cable (not included) to the  
network port on the back of your PCI adapter.  
2. Connect the other end of the Ethernet cable to an available  
Ethernet port on your existing router, hub, switch, or broadband  
modem.  
3. Reconnect the power cord to the computer, and make sure no  
other cables have come loose during installation.  
14 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
After you connect your adapter, the back of your computer will  
resemble the following diagram.  
Note  
Step 4: Configure Your Adapter  
If you originally logged on to  
an administrator account to  
begin Setup, make sure that  
you log on to the same  
administrator account after  
you restart your computer.  
1. Turn on your computer.  
When Windows starts, the Setup Wizard automatically resumes.  
2. Continue to follow the instructions in the Setup Wizard.  
When you complete the setup, click Finish to exit the Setup  
Wizard.  
3. Remove the Setup CD-ROM from your CD-ROM drive and keep it  
in a safe place for future installations.  
4. If your Internet service provider (ISP) requires additional  
network settings, such as a static IP address or special software  
to access the Internet, configure this now. For instructions, see  
your ISP documentation.  
Step 5: Test Your Network  
To confirm that your network is working properly, do the following:  
O
Ensure that your connections are working properly by viewing  
the status of your network in the Broadband Network Utility. To  
learn more about the Broadband Network Utility, see Chapter 5.  
O
If your network has Internet access, test the connection by  
opening your Web browser and visiting a Web site, such as  
If you are having network problems or you cannot connect to the  
Internet through your broadband modem, see “Network and  
Internet Problems” in Chapter 6.  
Chapter 3: Setting Up 15  
 
Computer-to-Computer Setup  
Use the setup instructions described here if:  
O
You want to connect two or more computers directly to each  
other or indirectly through a hub or switch.  
O
You want to connect a Microsoft Broadband Networking adapter  
to the first computer.  
O
All other computers to be networked have an installed Ethernet  
adapter or a built-in Ethernet port.  
Note  
You will need an Ethernet cable for each computer you are adding  
to your network. You will need a crossover Ethernet cable if you are  
connecting two computers directly to each other. You will need a  
straight-through Ethernet cable for each computer that connects to  
a switch or hub.  
For more information about  
crossover Ethernet cables,  
see Chapter 1.  
Step 1: Install the Software  
1. Insert the Setup CD-ROM into the CD-ROM drive of the computer  
that you want to connect to your network. If the Setup Wizard  
does not start automatically after a few seconds, double-click  
My Computer, double-click the drive that contains your Setup  
CD-ROM, and then double-click Setup or Setup.exe.  
2. In the Setup Wizard, do the following:  
O
When the wizard asks which device you are installing, click  
Network Adapter.  
O
When the wizard asks which network adapter you are  
installing, click PCI Adapter.  
3. When the Setup Wizard asks you to specify how you want to use  
your adapter, select the option for computer-to-computer setup.  
4. When the wizard asks you to install the PCI adapter on your  
computer, shut down your computer by clicking Close.  
5. After your computer shuts down completely, proceed to Step 2.  
Step 2: Install the Adapter in Your Computer  
Install the PCI adapter in your computer by following the  
instructions in “Step 2: Install the Adapter in Your Computer” in the  
“Typical Setup” section at the beginning of this chapter.  
16 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
Step 3: Connect Your Adapter to the Network  
Do one of the following:  
O
If you are connecting two computers directly to each other,  
connect one end of a crossover Ethernet cable to the network  
port on the computer that you are adding to the network. Then  
connect the other end to an available port on the other  
computer.  
O
If you are connecting three of more computers to a switch or  
hub, connect one end of a straight-through Ethernet cable to the  
network port on the computer you are adding to the network.  
Then connect the other end to an available port on the switch or  
hub. Connect the remaining computers to your switch or hub.  
Note  
Step 4: Configure Your Adapter  
If you originally logged on to  
an administrator account to  
begin Setup, make sure that  
you log on to the same  
administrator account after  
you restart your computer.  
1. Turn on your computer.  
When Windows starts, the Setup Wizard automatically resumes.  
2. Follow the instructions in the Setup Wizard to set up file and  
printer sharing.  
Note  
For more information about sharing files and printers, see  
Chapter 4.  
Workgroup names are used  
to group networked computers  
in Windows Network  
Neighborhood or My Network  
Places (depending on your  
operating system).  
3. To quit Setup and start the Microsoft Broadband Network Utility,  
click Finish.  
4. Remove the Setup CD-ROM from the CD-ROM drive and store it  
in a safe place for future installations.  
5. If your Internet service provider (ISP) requires additional network  
settings such as a static IP address or special software to  
access the Internet, configure this now. For instructions, see  
your ISP documentation.  
Step 5: Test Your Network  
To confirm that your network is working properly, do the following:  
O
Ensure that your connections are working properly by viewing  
the status of your network in the Broadband Network Utility. To  
learn more about the Broadband Network Utility, see Chapter 5.  
O
If your network has Internet access, test the connection by  
opening your Web browser and visiting a Web site, such as  
If you are having network problems or you cannot connect to the  
Internet through your broadband modem, see “Network and  
Internet Problems” in Chapter 6.  
Chapter 3: Setting Up 17  
 
Note  
For Windows 98 Users  
If you have any problems  
connecting to or using your  
network, see Chapter 6.  
If you cannot access other computers on your network, you might  
need to set up a static IP address on your computer.  
Some ISPs provide each computer on their network with a  
permanent, or static, IP address, which uniquely identifies your  
computer on the Internet. When you use a static IP addressing  
scheme, each computer on your network requires a unique IP  
address provided by your ISP. Because of this, the Setup Wizard  
cannot automatically determine this static address and configure  
your network for Internet access.  
To verify and configure your network IP address, do the following:  
1. Click Start, point to Settings, and then click Control Panel.  
2. Double-click Network.  
3. Under The following network components are installed, click  
TCP/IP, and then click Properties.  
4. In the TCP/IP Properties dialog box, click IP Address.  
If a static IP address appears in the IP address list, you do not need  
to configure one. For more troubleshooting steps, see Chapter 6.  
If a static IP address does not appear in the IP address list, follow  
the instructions below to choose and configure a new IP address.  
Choosing an IP Address  
IP addresses for internal networks are written as 192.168.X.Y,  
where X and Y can be any number from 0 through 255.  
For each computer on your network, select an IP address by  
choosing values for X and Y. Write down the IP address of each  
computer in a safe place, to help with configuration in the future.  
Tip: Use the same number for X on each computer on the network,  
and start Y with 10, increasing the number by one for each  
additional computer. Using this scheme, your IP addresses would  
read: 192.168.1.10, 192.168.1.11, 192.168.1.12, and so on.  
To Configure a Static IP Address  
1. Click Start, point to Settings, and then click Control Panel.  
2. Double-click Network.  
3. Under The following network components are installed, click  
TCP/IP, and then click Properties.  
4. In the TCP/IP Properties dialog box, click the IP Address tab.  
5. In the IP Address field, type the new IP address for this  
computer.  
6. Click Apply to save your changes, and then click OK.  
7. When prompted, restart your computer.  
18 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
After Windows starts, try testing your network again by using the  
instructions in “Step 5: Test Your Network,” above.  
If you are still having problems connecting to your network, see  
“Network and Internet Problems” in Chapter 6.  
Setting Up an Adapter by Using Plug and Play  
Most Windows-based computers recognize when a new hardware  
device has been installed and immediately try to configure it.  
The Setup Wizard is designed to walk you through the process of  
installing your adapter. The wizard installs the Broadband  
Networking Utility, which allows you to monitor, configure, and  
troubleshoot your network.  
To gain the benefits of the Broadband Networking Utility on your  
network, run the Setup Wizard before installing the adapter in your  
computer.  
Note  
If you install the adapter on your computer before you run the  
Setup Wizard, the Windows operating system will use its Plug and  
Play feature to display the New Hardware Wizard, Add New  
Hardware Wizard, or Found New Hardware Wizard (depending on  
your operating system).  
If you install your PCI  
adapter before running the  
Setup Wizard, you will need  
to manually configure your  
network settings.  
If you are installing the adapter for use on a HomePNA or Power  
Line (PLC) network, use the following instructions.  
To set up your adapter by using Plug and Play  
1. Connect the adapter to your computer by following the  
appropriate instructions in Step 2 of the Typical Setup method  
presented earlier in this chapter.  
2. Turn on your computer and log on to Windows. Plug and Play  
detects the newly connected adapter and starts the Hardware  
Wizard.  
3. Insert the Broadband Networking Setup CD-ROM into your CD-  
ROM drive.  
4. In the Hardware Wizard, specify the CD-ROM as the location to  
search for the PCI adapter driver.  
The wizard loads the network adapter driver into memory.  
5. Restart your computer if the Hardware Wizard asks you to do so.  
If the wizard does not finish, see Chapter 6.  
6. If you want this computer to connect to the Internet, configure  
your Internet settings based on the information provided by your  
Internet service provider (ISP).  
7. To make sure your adapter works correctly, do one of the  
following:  
Chapter 3: Setting Up 19  
 
O
O
O
If you are connected to the Internet, test your adapter by  
opening your Web browser and visiting a Web site, such as  
If you are connected to another computer or an internal  
network, test your adapter by accessing shared files, folders,  
or printers on the network.  
If you are not successful with either of the previous tests, see  
the troubleshooting topics in Chapter 6. For more information  
about Plug and Play, see Windows Help.  
20 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
4 network tasks.  
Using Your Network  
After setting up your wired network, you can perform common  
networking tasks, such as making files and printers available to  
other computers, and playing multiplayer games. When you need  
to check network settings or monitor devices connected to your  
network, you can use the Microsoft® Broadband Network Utility.  
This chapter describes how to:  
O
Log on to your workgroup.  
O
Perform common networking tasks.  
O
Secure your network.  
Log On to Your Workgroup  
After starting your computer, you must always log on to your network  
to access shared files, printers, and other resources.  
If your computer is running an operating system that displays the  
Cancel button, do not click Cancel during the logon process, even  
if you decide to leave your password blank. Doing so will prevent  
you from accessing shared files and printers on the network. Make  
sure that your workgroup name is visible in the logon screen, type  
your password, and then click OK.  
After you log on, you can perform certain networking functions,  
such as accessing the Internet or opening shared files from  
Microsoft Windows® Explorer. You do not need to open the  
Broadband Network Utility to perform these tasks.  
Do Not  
Click Cancel  
 
To log off and log back on to your network  
1. Click Start.  
2. Click Log Off. (Or, in Microsoft Windows 2000, click Shut Down,  
make sure “Log Off” appears on the menu, and then click OK.)  
3. Log on to your network.  
After you log on to your network, you can perform certain network  
functions, such as opening shared files from Windows Explorer.  
Perform Common Networking Tasks  
The information in this section will help you get started with the  
following tasks:  
O
Allowing access to an Internet connection  
O
Important  
Allowing access to files and folders  
Before you proceed, check  
with your Internet service  
provider about its policy  
regarding Internet sharing.  
O
Allowing access to printers  
O
Sharing other peripheral devices  
O
Reading e-mail messages on your network  
O
Playing games on your network and on the Internet  
Allowing Access to an Internet Connection  
If you have a gateway or router on your network and a connection  
to the Internet through a DSL or cable modem, the other  
computers on your network can share that Internet connection by  
using Internet Connection Sharing (ICS).  
The procedure for accessing the Internet is the same whether your  
Internet connection is shared through a base station (gateway or  
router) or through ICS in Windows XP. In either case, each  
computer on the network needs to have a Web browser, such as  
Microsoft Internet Explorer.  
About Internet Connection Sharing (ICS)  
Note  
Internet Connection Sharing is a feature found in Windows 98 SE,  
Windows Me, Windows 2000, and Windows XP that allows  
computers on a network to access the Internet through a single  
connection. If you use a Windows–based computer as your Internet  
access point (or ICS host), that computer must be turned on and  
you must be logged on to it for the other computers in your network  
to connect to the Internet.  
For help using the file- and  
printer-sharing options in  
Windows XP, click Start, click  
Help and Support, and then  
type “ICS” in the Search box.  
For more information, look up “Internet Connection Sharing” in  
Windows Help.  
The procedure for accessing the Internet is the same whether your  
Internet connection is shared through a Base Station or through  
Internet Connection Sharing in Windows.  
22 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
Note  
To access the Internet from each computer on a network  
If you have Microsoft Windows  
2000 or Windows XP, you  
mightneed to have  
administrative privileges (or  
be the network administrator)  
to share folders with others.  
For more information, type  
“administrator” in the Search  
box in Windows Help.  
1. Make sure that you have a Web browser (such as Microsoft  
Internet Explorer) installed on each computer that is connected  
to your network.  
2. On any of the networked computers, open the Web browser.  
3. Search for the Web site you want, or enter the address in the  
Address bar.  
Note that the rate at which you are able to send and receive data  
over the Internet is highly dependent on many factors. Adding  
another user to your Internet connection typically reduces the  
speed of data transfer, but you are unlikely to notice the difference.  
Allowing Access to Files and Folders  
The information in this section provides general guidance for a few  
basic file-sharing tasks. For more detailed instructions and  
information about sharing files and folders, see Windows Help. To  
access Windows Help, click Start, and then click Help (or Help and  
Support in Windows XP).  
To make it easy to share files and folders, all of your networked  
computers should be in the same workgroup. For more  
information, look up “workgroup” in Windows Help.  
Sharing files and folders is a two-step process. You will need to:  
1. Make the files and folders available to the network.  
2. Use Windows (Network Neighborhood, My Network Places, or  
Windows Explorer) to access the shared files and folders.  
To make your files and folders available to the network  
While setting up your broadband network, you might have chosen  
to share all of your files and folders with the network. If you decide  
that you want to share only some of your files and folders with the  
network, you can use Microsoft Windows to specify which files and  
folders to share.  
You can share an entire drive with the network, or you can share  
specific folders. Let’s say that you store photographs of your  
children in a folder named “Kids” on your computer, and you want  
to make the photographs available to your network. To do so, you  
would share only the Kids folder and not the other folders on your  
computer.  
Only the computer users on your network will have access to the files  
you share. At times, you might want to prevent users, such as your  
children, from accessing particular folders and the files they contain.  
If you want to increase the security of your shared files, you can  
assign permissions and passwords to your files and folders. For  
more information, look up “permission” and “access control” in  
Windows Help. (In Windows Me, look up “controlling access.”)  
Chapter 4: Network Tasks 23  
 
Although you can share files, printers, and other devices on your  
network, you cannot share software programs, such as Microsoft  
Word or Microsoft Excel. If each computer on the network has  
those programs installed, you can share the files that you create  
within those programs.  
For a computer’s files and folders to be available to the network,  
the computer must be turned on and logged on to the network.  
Also, if the computer is turned on but in sleep mode, it will not be  
accessible from the network. For more information, look up “power  
options” in Windows XP Help, or “power management” in Windows  
Me, Windows 2000, and Windows 98 Help.  
To access and organize your files  
Windows Explorer displays the hierarchical structure of files,  
folders, and drives on your computer. By using Windows Explorer,  
you can copy, move, rename, and search for files and folders. For  
example, you can open a folder that contains a file that you want to  
copy or move, and then drag the file to another folder or drive.  
To open Windows Explorer, click Start, point to All Programs (or  
Programs, depending on your version of Windows), point to  
Accessories, and then click Windows Explorer.  
You can use My Network Places (or Network Neighborhood, in  
Windows 2000 and Windows 98) to view all of the shared files and  
folders on your network.  
My Network Places/Network Neighborhood presents a view of the  
network similar to the view of your computer presented by Windows  
Explorer. Use My Network Places/Network Neighborhood when you:  
O
Want to see all the resources available on the network.  
O
Already know where the resource that you want is located.  
O
Want to copy files and folders from one network location to  
another.  
To open My Network Places, click Start, and then click My Network  
Places.  
To open Network Neighborhood (in Windows 2000 and Windows  
98), double-click Network Neighborhood on your desktop.  
Before files or folders can be shared on your network, you will need  
to do the following:  
O
Make the file, folder, or drive available to the network.  
O
Use My Network Places or Network Neighborhood to view and  
access shared files and folders.  
For a computer’s files and folders to be available to the network,  
the computer must be turned on. If the computer is in sleep mode,  
24 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
it will not be accessible from the network. For more information,  
type “power options” in the Search box in Windows Help.  
To open a file stored on another computer on the network  
To complete this task, you must have the program on the local  
computer that was used to create the file. For example, if you want  
to open a file whose file name extension is .xls, you must have  
Microsoft Excel on your computer.  
1. Open My Network Places or Network Neighborhood. (See the  
earlier instructions on how to open these windows.)  
2. Double-click the name of the computer that has the file that you  
want to open.  
3. Locate the file that you want to open.  
4. Double-click the file.  
To copy a file from your computer to another place on the network  
You need to open only one window -- either Windows Explorer, My  
Network Place, or Network Neighborhood -- to complete this task.  
Your computer and the computer you want to copy the file to will  
both appear in the same window.  
1. Open Windows Explorer, My Network Places, or Network  
Neighborhood. (See the earlier instructions on how to open  
these windows.)  
2. On your computer, locate the file that you want to copy to  
another computer on the network.  
3. Click to highlight the file.  
4. On the Edit menu, click Copy.  
5. Click the destination folder on the other computer. (You might  
need to scroll through the window to find the folder that you  
want).  
6. On the Edit menu, click Paste.  
Chapter 4: Network Tasks 25  
 
Note  
Allowing Access to Printers  
Some printer drivers are not  
designed to allow printer  
sharing. For more information,  
see the documentation that  
came with your printer.  
By using Windows, you can print documents on a printer that is  
attached to another computer on your network.  
The following procedures provide general guidance for a few basic  
printer-sharing tasks. The steps that you need to take to complete  
these tasks will vary depending on the version of Windows installed  
on your computer. For complete instructions and information about  
sharing printers, type “printer sharing” in the Search box in  
Windows Help.  
There is a difference between a “network printer” and a “local  
printer” that you share on a network. A network printer is  
connected directly to the network, rather than to a particular  
computer, and can be used by anyone on the network. Most offices  
have network printers that are stored in copy rooms accessed by  
many employees. A local printer, on the other hand, is attached to  
a specific computer, but can be shared with other computers on  
the network. You will most likely be using local printers with the  
Broadband Network Utility.  
Before you can use a printer that is attached to another computer  
on your network, you will need to do the following:  
O
Make the printer available to the network (this is also known as  
sharing a printer).  
O
Run the Add Printer Wizard on each computer that you want to  
print from. This Installs the printer drivers on each networked  
computer that will use the shared printer.  
The procedures for sharing a printer and installing drivers differ  
depending on your version of Windows. For more detailed  
instructions, look up “sharing printers” in Windows Help.  
To print to a printer that is attached to another computer on the  
network  
1. Open the document that you want to print, such as a document  
in Microsoft Word.  
2. On the File menu, click Print.  
3. In the Print dialog box, select the shared printer from the list of  
printers.  
4. Click OK.  
26 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
Sharing Other Peripheral Devices  
In addition to sharing most printers, you can share storage  
devices—such as hard drives, CD-ROM drives, and Zip drives—on  
your network. In general, any kind of drive represented by a drive  
letter (such as D:\) can be shared.  
Storage devices that are not assigned a drive letter (such as tape  
drives) cannot be shared. Tape backups of your computer must be  
done from the computer that is attached to the tape drive.  
In general, scanners, cameras, and CD-ROM burners cannot be  
shared with your network.  
Reading E-Mail Messages  
You can access your e-mail messages from each networked  
computer the same way that you would access e-mail messages  
without a network (assuming that you have an Internet connection).  
Open your e-mail program, or, if you have a Web-based e-mail  
account, sign in to your account through your Internet browser.  
Keep in mind the following: If you download e-mail messages from  
your e-mail account to one computer, those messages will not be  
accessible from the other computers on your network. Likewise, if  
you share an account with another person, and he or she  
downloads mail from the shared account to one computer on the  
network, you will not see that mail when you access the account  
from another computer.  
To illustrate this point, let’s say you share a postal mailbox at your  
home with your spouse. If you come home first and take the letters  
out of the mailbox, they will no longer be inside the mailbox when  
your spouse comes home later and checks for mail.  
If you want your e-mail messages to remain available to all users of  
your network at any time, you should not download the messages  
to one computer. (However, you should delete old messages from  
your e-mail account on a regular basis, so that you don’t exceed  
the storage space given to you by your e-mail provider.)  
Chapter 4: Network Tasks 27  
 
Playing Games on Your Network and on the Internet  
Many of the most popular games now have multiplayer capability,  
allowing two or more players to compete by using a local network.  
With network-enabled games, you can use your networked  
computers to play games with friends and family members.  
Most games come with documentation that explains all you need to  
know to configure your network for multiplayer gaming. However,  
the following steps might help you prepare for playing games over  
the network:  
O
If you have purchased a multiplayer game, be sure to install  
it on each computer on the network that will be used for  
playing games.  
O
If you are playing a Web-based game, you might also be required  
to pay user fees or download game files to your computer. Be  
sure to follow the directions provided on the Web site.  
O
Make sure that the network protocols necessary to run the  
games that you want are installed on each computer on your  
network. For more information, see the documentation that  
came with your games.  
O
If you have problems connecting to a Web-based game, you  
might need to configure the base station to work with the ports  
that your game uses. For more information, see “Port  
Forwarding” in Chapter 6.  
For information about playing games on the Internet, and for other  
game-related information, visit  
28 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
Secure Your Network  
Protecting the data and programs on your network computers from  
security threats, such as computer viruses and hackers, is very  
important. The following sections provide general information about  
steps you can take to protect your network.  
Important  
Protect Your Network from Computer Viruses  
Because Windows XP Internet  
Connection Firewall (ICF) will  
interfere with file and printer  
sharing, do not enable ICF on  
virtual private network (VPN)  
connection or on client  
computers.  
Even with a base station (gateway or router) installed, your network  
is still vulnerable to viruses.  
To avoid having a problem with viruses on your network, consider  
the following suggestions:  
O
Educate yourself about how viruses are commonly spread so  
that you do not spread one yourself.  
Do not load a program from an untrustworthy source on one  
of your network computers. E-mail attachments from people  
you don’t know or files from the Internet or online bulletin  
boards are particularly risky.  
Never open e-mail attachments that you are not expecting.  
Scan all floppy disks before copying or opening files from  
them, or before starting your computer from them.  
O
O
Install an antivirus program on each computer on your network  
and use it regularly to check your computers for viruses.  
Remember to update the antivirus program on a regular basis.  
Learn the common signs of viruses: unusual messages that  
appear on your screen, decreased system performance, missing  
data, and inability to access your hard drive. If you notice any of  
these problems on your computer, run your antivirus software  
immediately to minimize the chances of losing data.  
Chapter 4: Network Tasks 29  
 
Protect Your Network from Hackers  
If you have not already done so, consider purchasing the Microsoft  
Broadband Networking Wired Base Station to establish a security  
layer between your network computers and the Internet. The  
security mechanisms provided by the base station include a firewall  
and Network Address Translation (NAT).  
A firewall is a barrier that helps protect your network from  
unauthorized visitors. Like an actual firewall built to help prevent  
fire from spreading between adjoining buildings, computer firewalls  
help prevent unauthorized communication between an individual  
computer or group of networked computers and the Internet.  
The firewall specifies what information can be communicated from  
the computers on your network to the Internet, and from the  
Internet to the computers on your network.  
NAT hides the IP addresses of the individual computers on a  
network from the Internet so that only the router’s IP address is  
visible on the Internet. Hiding these addresses provides another  
layer of protection against hackers trying to access the computers  
on your network.  
30 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
monitoring.  
The Microsoft® Broadband Network Utility is automatically  
installed on your computer when you install the Setup software.  
Use it to check the status of your network or change your network  
settings. The Broadband Network Utility also shows the devices  
currently connected on your network.  
5
The Broadband Network Utility  
This chapter describes how to:  
O
View computer, network connection, and Internet connection  
status.  
O
View and change network settings.  
O
Update network software, drivers, and firmware.  
To open the Broadband Network Utility, do one of the following:  
O
Double-click the Broadband Network Utility icon  
in the  
Windows notification area of the tray.  
O
Click Start, point to Programs, and then click Microsoft  
Broadband Network Utility.  
Your Computer Status  
Your Network Status  
(This page will look different  
if your network does not  
use a base station.)  
Your Internet  
Connection Status  
Status of all computers and  
devices in your workgroup  
 
The following sections describe how to interpret status information  
about your network and perform common tasks by using the  
Broadband Network Utility.  
For more detailed information about any of these tasks, see  
Broadband Network Utility Help.  
To Open Broadband Network Utility Help  
1. Open the Broadband Network Utility.  
2. On the Help menu, click Microsoft Broadband Network  
Utility Help.  
View the Status of Your Computer  
This area of the Broadband Network Utility displays information  
about the computer that you are currently using. If you cannot  
access the Internet, or your network is not available, use the  
troubleshooting link to go directly to the list of related topics. For  
other network problems, on the Help menu, click Microsoft  
Broadband Network Utility, double-click Troubleshooting, and  
then click the topic that you want.  
View the Status of Your Network Connection  
This area of the Broadband Network Utility displays information  
about your network connection. If there is a problem with your  
connection, on the Help menu, click Microsoft Broadband  
Network Utility, double-click Troubleshooting, and then click the  
file that you want.  
You can also view information about the status of your network  
connection by resting the pointer on the Broadband Network Utility  
icon  
in the Windows notification area of your taskbar or tray.  
Broadband Network  
Utility Icon  
32 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
View the Status of Your Broadband Internet  
Connection  
This area of the Broadband Network Utility lets you know whether  
you are currently connected to the Internet. If there is a problem  
with your Internet connection, on the Help menu, click Microsoft  
Broadband Network Utility, double-click Troubleshooting, and  
then click the file that you want.  
View the Status of Other Network Devices  
This area of the Broadband Network Utility displays information  
about all the computers and devices in your workgroup.  
To refresh the network device list  
O
Right-click any icon in the network device list, and then click  
Refresh.  
To remove an inactive device from the network device list  
O
Right-click the dimmed icon for the device, and then click  
Remove from List.  
View and Change Network Settings  
You can view and change your adapter settings from the Broadband  
Network Utility. If you have a Microsoft base station, you can also  
use the Broadband Network Utility to view and change your base  
station settings.  
To view adapter settings  
O
On the Tools menu, click Computer Settings.  
To view and change base station settings  
1. On the Tools menu, click Base Station Management Tool.  
2. Type the base station password.  
Customize the Broadband Network Utility  
You can customize the way you view and use the Broadband  
Network Utility.  
To customize the Broadband Network Utility  
O
On the Tools menu, click Options.  
Chapter 5: Monitoring 33  
 
Update Software, Drivers, and Firmware  
Occasionally, Microsoft might provide upgrades to the Broadband  
Network Utility software, network drivers, or firmware on the  
Microsoft Broadband Networking Web site. When an upgrade is  
available, you will automatically be notified. After you log on to a  
networked computer, a message will appear in the notification  
area of your desktop with a link to the Microsoft Broadband  
Networking Web site.  
To update network software, drivers, or firmware  
1. Open the Broadband Network Utility.  
2. On the Help menu, click Check for Updates Online.  
3. Follow the instructions on the Microsoft Broadband Networking  
Web site to download the most current software, drivers, or  
firmware.  
34 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
troubleshooting.  
6
Basic Troubleshooting  
This chapter will help you solve installation and setup problems  
with your Microsoft® Broadband Networking Ethernet adapter. The  
following areas are covered:  
O
Setup and Hardware Problems  
O
Network and Internet Problems  
O
File and Printer Sharing Problems  
If the problem you are experiencing is not covered in this chapter,  
you can find more troubleshooting information in Broadband  
Network Utility Help, or on the Microsoft Broadband Networking  
Setup and Hardware Problems  
This section will help you solve problems you might encounter while  
running the Setup Wizard or connecting your new adapter.  
I’m having problems installing the Broadband Network Utility.  
O
Verify that your computer conforms to the minimum system  
requirements for your Microsoft Broadband Networking adapter.  
When you run the Setup Wizard, the Broadband Network Utility  
is installed automatically. If your computer does not meet the  
minimum system requirements, the software might not install  
fully or at all.  
After installing my PCI adapter, I cannot turn on my computer or  
it goes into Safe Mode when Windows starts.  
O
Verify that the PCI slots in your system are at least PCI 2.1  
compliant. This information is listed in the manual that came  
with your computer.  
O
Verify that the PCI adapter is firmly connected to the PCI slot in  
Note  
To avoid electrostatic shock,  
always disconnect the power  
cable from your computer  
when working inside the  
computer case.  
your computer. A partially connected PCI adapter might cause  
your computer either to not turn on or to function erratically.  
O
If you have another available PCI slot in your computer, try  
moving the PCI adapter to that slot.  
O
Try plugging the PCI adapter into PCI slot 1 in your computer. For  
more information about which PCI slot is slot 1, see your  
computer’s documentation.  
 
Each PCI slot in your computer uses different system resources.  
By trying a different PCI slot, you can remove potential resource  
conflicts between your PCI adapter and other computer  
peripherals.  
O
Resolve any device conflicts in Windows. You can use Windows  
Troubleshooting to ensure that your PCI adapter is not trying to  
use computer resources already being used by another piece of  
hardware. For more information about resolving device conflicts,  
see Windows Help.  
The Setup Wizard or Windows is not detecting the connection to  
my PCI adapter.  
O
Make sure that the cables in your network are securely fastened  
to the correct ports, and your network card is properly seated in  
the correct slot.  
Check all of the following connections: power cables, cables  
between the adapter and the network, and cables between the  
network and the broadband modem.  
Ethernet cables closely resemble standard residential telephone  
cables. However, The RJ-45 connectors on Ethernet cables are  
larger than the RJ-11 connectors on telephone cables. Although  
a standard residential telephone connector can be inserted into  
an Ethernet port, the port will not function and the cable might  
damage your Ethernet device.  
O
Make sure that the status LED on your PCI adapter is illuminated  
when connected to your network. If it is not illuminated, try a  
different Ethernet cable or a different network port.  
Network and Internet Problems  
This section will help you solve common installation and setup  
problems as you integrate the Microsoft Broadband Networking PCI  
Adapter with a new or existing network.  
The PCI adapter is designed to have the software installed before  
the hardware; otherwise, the Setup Wizard will not correctly  
configure your network settings.  
If you replaced your previous network adapter with a Microsoft  
adapter, make sure that you disabled all of your previous network  
settings and removed all unnecessary cabling. When possible, use  
the same cables to reconnect your computer to the network. Doing  
so can help prevent connectivity problems.  
36 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
My computer recognizes my network, but it is not working  
correctly.  
O
Verify that you have the correct network settings.  
Incorrect network settings will prevent networked computers  
from communicating properly. For example, a computer might  
try to detect a network by using the wrong name or by using a  
different communication protocol than that of all of the other  
computers on the network. You can view and modify most  
network settings in the Broadband Network Utility.  
For more information about viewing and modifying your network  
settings, search for “Network” in Windows Help.  
My network connection works only occasionally.  
O
Verify that other devices running Network Address Translation  
(NAT) or Dynamic IP (DHCP) have NAT and DHCP disabled.  
Devices such as your modem might have NAT or DHCP running  
at the same time as another network device, such as a base  
station (gateway or router). If this is the case, the devices will  
interfere with each other and cause intermittent failures. For  
instructions about disabling NAT and DHCP on the other device,  
see the documentation for the other device.  
My network is slow.  
O
Try decreasing the number of computers that are  
simultaneously accessing your network.  
Your network has a limited amount of bandwidth for  
transmitting data. As more computers access your network at  
the same time, the bandwidth must be split up between all  
computers. By reducing the number of computers accessing  
your network, you can increase the bandwidth available to each  
computer.  
You might find that you need more bandwidth to use all of your  
computers on the network. If your connection is still too slow,  
you can contact your Internet service provider (ISP) to verify that  
there are no problems with your connection or to inquire about  
upgrading to a faster connection.  
My computer can’t find my workgroup.  
O
Check the name of the workgroup in network settings on  
another computer in the workgroup.  
The workgroup name is on the Advanced Network Settings  
screen, which you can access from the Customize Your Network  
screen in the Broadband Network Utility.  
If your computer can’t find your workgroup, it might be using the  
wrong name to look for the workgroup or you might be logged on  
to a domain. You cannot be logged on to a domain and a  
workgroup at the same time.  
Chapter 6: Troubleshooting 37  
 
My existing network used to work, but now it doesn’t.  
O
Check the existing network installation to verify that all cables  
are still attached and all link/activity lights on the other network  
devices read correctly.  
O
Verify that the network settings on all of the computers are  
correct.  
For more information about replacing or integrating an existing  
network with the Broadband Network Kit, see Chapter 4. For  
more detailed information, see Broadband Network Utility Help.  
I cannot access the Internet with my newly networked computer,  
even though the Setup Wizard finished successfully. My other  
networked computers can access the Internet.  
If you have successfully completed the Setup Wizard to install your  
adapter, but cannot access the Internet from the system with the  
new adapter, you might need to configure your Internet settings for  
access to your Internet service provider (ISP).  
The troubleshooting steps necessary to fix your Internet connection  
are different depending on what type of connection you have, so  
the first step is to determine how you connect to your ISP for  
Internet access. This information is available either in the  
documentation from your ISP or by calling technical support for  
your ISP and inquiring about your connection type. There are three  
main broadband connection types:  
Dynamic Host Configuration Protocol (DHCP) connections  
DHCP is the most common type of broadband Internet access. By  
default, the Setup Wizard configures your adapter to use DHCP. If  
you are connecting your adapter to a base station (router or  
gateway), you do not need to configure any additional network  
information.  
The following instructions will help you troubleshoot Internet  
connection problems with DHCP:  
O
Try accessing shared files or printers on another computer on  
your network. If you cannot access the other computers, check  
to make sure all cables are connected between your computer  
and the network, and the status light on your PCI adapter’s  
mounting bracket is green.  
O
Try connecting the Ethernet cable from this computer to a port  
on your base station, switch, or hub that is currently connected  
to a computer that can access the Internet.  
If your newly networked computer can connect to the Internet  
when using another computer’s network port, there might be a  
problem with one of the ports on your networking hardware.  
Consult the documentation for the base station, hub, or switch  
for troubleshooting steps particular to that hardware.  
38 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
Point-to-Point Protocol over Ethernet (PPPoE) connections  
PPPoE is a connection type used by some DSL modems to access  
the Internet through an ISP. If you use a PPPoE connection to  
connect to the Internet, your ISP should have provided you with  
special access software. This software will automatically connect to  
the Internet by using the user name and password provided by your  
ISP.  
Check the documentation from your ISP to find out more about how  
to install and configure the access software on your computer. You  
will not be able to access the Internet without this software.  
Static IP address connections  
Some ISPs provide each computer on their network with a  
permanent, or static, IP address, which uniquely identifies your  
computer on the Internet. When you use a static IP addressing  
scheme, each computer on your network requires a unique IP  
address provided by your ISP. Because of this, the Setup Wizard  
cannot automatically determine this static address and configure  
your network for Internet access. The following section describes  
the necessary steps for configuring a static IP address.  
Before you begin, make sure that you have all of the configuration  
information from your ISP, including a unique static IP address, a  
gateway address, and one or two DNS server addresses for the  
newly networked computer.  
To configure a static IP address, follow the instructions for your  
operating system.  
Windows XP:  
1. Click Start, click Control Panel, and then double-click  
Network Connections.  
2. Click the connection you want to configure, and then, under  
Network Tasks, click Change settings of this connection.  
3. On the General tab, under This connection uses the  
following items, click Internet Protocol (TCP/IP), and then  
click Properties.  
4. Click Use the following IP address, and in IP address, type  
the new static IP address you wish to assign to this computer.  
5. Type 255.255.255.0 in Subnet mask.  
6. Type the gateway address in Default gateway.  
7. Click Use the following DNS server addresses, and in  
Preferred DNS server and Alternate DNS server, type the  
addresses of the primary and secondary DNS servers.  
8. Click Apply or Close to save your new Internet settings.  
9. Test your Internet connection by opening a Web page in your  
browser.  
Chapter 6: Troubleshooting 39  
 
Windows 98, Windows 98 SE, and Windows Me:  
1. Click Start, click Settings, click Control Panel, and then  
double-click Network.  
2. Under The following network components are installed,  
click TCP/IP and then click Properties.  
3. Click the IP Address tab in the TCP/IP Properties window.  
4. Type the new IP address for this computer in IP address. For  
guidelines on choosing an IP address, see “Computer-to-  
Computer Setup” in Chapter 3.  
5. Type 255.255.255.0 in Subnet Mask.  
6. Click the Gateway tab, and type your gateway in New  
Gateway.  
7. Click Add to add your gateway.  
8. Click the DNS Configuration tab, and in Primary DNS server  
and Secondary DNS server, type the addresses of the  
primary and secondary DNS servers  
9. Click Apply or OK to save your changes, and then click OK to  
quit the TCP/IP Properties window. When prompted, restart  
your computer.  
10. After Windows starts, try testing your Internet connection by  
opening a Web page in your browser.  
Windows 2000:  
1. Click Start, click Control Panel, and then double-click  
Network and Dial-Up Connections.  
2. Double-click Local Area Connection.  
3. On the Local Area Connection Status page, click Properties.  
4. Under Components checked are used by this connection,  
click TCP/IP and then click Properties.  
5. Click Use the following IP address, and in IP address, type  
the IP address.  
6. Type the subnet mask and gateway addresses in Subnet  
mask and Default gateway, respectively.  
7. Click Use the following DNS server addresses, and in  
Preferred DNS server and Alternate DNS server, type the  
addresses of the primary and secondary DNS servers.  
8. Click Apply or OK to save your changes, and then click OK to  
quit the TCP/IP Properties window. If prompted, restart your  
computer.  
9. After Windows starts, try testing your Internet connection by  
opening a Web page in your browser.  
40 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
File and Printer Sharing Problems  
This section will help you solve common installation and setup  
problems with sharing files and printers on your network. If you  
installed your network hardware by using the Setup Wizard, file and  
printer sharing might have automatically been configured for you,  
depending upon your network configuration.  
To learn how to add or share files and printers over your network,  
see Chapter 4 and Windows Help.  
I cannot access shared files over my network.  
To share files between computers on your network, all computers  
must belong to the same workgroup. Check the workgroup names  
on each computer by using the following instructions.  
Windows XP:  
1. Click Start, and then click Control Panel.  
2. Double-click System, and then click the Computer Name tab.  
Windows 2000:  
1. Click Start, point to Settings, and then click Control Panel.  
2. Double-click System.  
3. Click the Network Identification tab.  
Windows 98, Windows 98 SE, and Windows Me:  
1. Click Start, point to Settings, and then click Control Panel.  
2. Double-click Network, and then click the Identification tab.  
If you need to change your workgroup name on a computer, click  
Change, and then type the correct workgroup name. After  
restarting your computer and joining the new workgroup, try  
sharing or accessing shared files again.  
My printer is connected directly to my computer and is not being  
recognized by other computers on my network.  
O
Check to make sure that the printer is turned on.  
O
Verify that the cable connecting the printer and the computer is  
securely attached.  
O
Try printing by using the self-test feature built into your printer.  
Each printer’s self-test feature is slightly different. See your  
printer documentation for specific instructions.  
If the printer self-test does not work, see your printer  
troubleshooting documentation for more information.  
If the printer self-test works correctly, the problem might be with  
your network connection or with your printer drivers.  
Chapter 6: Troubleshooting 41  
 
O
Check to make sure all computers on the network have the  
proper printer driver installed.  
You can install the printer driver by opening the Printers page  
in the Control Panel. If Windows prompts you for a driver disk,  
use the driver disk that came with your printer. For more  
information about configuring your printer, see Windows Help.  
O
Verify that all network cables between the computers and the  
printer are securely connected.  
You can check to see whether the network recognizes a  
connection by inspecting the link lights associated with the  
Ethernet ports on your hardware. When the cable is connected  
successfully, the link light should be illuminated.  
If one of your network cables is connected to a network port that  
does not have an illuminated link light, there might be a  
problem with the cable itself. Try using a different Ethernet  
cable to make the connection.  
My printer is connected directly to my network, and I cannot  
access the printer from the computers on my network.  
O
Check to make sure that the printer is turned on.  
O
Verify that all network cables between the computers and the  
printer are securely connected.  
You can check to see whether the network recognizes a  
connection by inspecting the link lights associated with the  
Ethernet ports on your hardware. When the cable is connected  
successfully, the link light should be illuminated.  
If one of your network cables is connected to a network port that  
does not have an illuminated link light, there might be a  
problem with the Ethernet port or the cable itself. Try using a  
different Ethernet cable to make the connection.  
O
Try printing by using the self-test feature built into your printer.  
Each printer’s self-test feature is slightly different. See your  
printer documentation for specific instructions.  
If the printer self-test does not work, see your printer  
troubleshooting documentation for more information.  
If the printer self-test works correctly, the problem might be with  
your network connection or with your printer drivers.  
42 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
O
Check to make sure that all computers on the network have the  
proper printer driver installed.  
You can install the printer driver by opening the Printers page in  
the Control Panel. If Windows prompts you for a driver disk, use  
the driver that came with your printer. For more information  
about configuring your printer, see Windows Help.  
My networked printer is visible on the network, but it does  
not print.  
O
Try resetting the printer. See your printer documentation for  
instructions.  
O
If you are troubleshooting a printer that is connected directly to  
the network, try printing a test page by using the printer’s  
diagnostic features. If the test page prints correctly, the problem  
might be in the network or the printer networking settings.  
O
Check the program from which you are trying to print to ensure  
that printing is enabled and the correct printer is selected.  
Chapter 6: Troubleshooting 43  
 
 
reference.  
Getting Help  
Visit Us on the Web  
Please visit our Web site at  
Click Help in the Broadband Network Utility  
Click Help in the Microsoft® Broadband Network Utility for detailed  
troubleshooting information.  
Technical Support  
Product Name:  
Microsoft® Broadband Networking PCI Adapter  
Support Information Online:  
Online Support:  
Work with a Microsoft Support Professional over the Internet.  
Submit your issue online:  
Phone Support:  
Toll-free support for U.S. customers: (800) 936-3900. For customers  
in Canada: (800) 668-7975. These numbers are only for support of  
Microsoft Broadband Networking products. Please do not use  
these phone numbers for support of other Microsoft products.  
TTY Users:  
Microsoft text telephone (TTY/TDD) services are available at  
(425) 635-4948 in Washington state or (800) 892-5234  
elsewhere in the United States. Call (905) 568-9641 in Canada.  
Worldwide:  
The support terms listed here are available in the United States  
and Canada only.  
Support outside the United States and Canada may vary.  
For regional contact details, please visit  
Conditions:  
Microsoft’s support services are subject to then-current prices,  
terms, and conditions, which are subject to change without notice.  
 
Regulatory Information  
United States Radio and TV Interference Regulations  
This device complies with Part 15 of the U.S. Federal Communications Commission (FCC) rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
The Microsoft hardware device(s) that accompanies this software can radiate radio frequency (RF) energy. If not installed and  
used in strict accordance with the instructions given in the printed documentation and software Help file, the device may  
cause harmful interference with other radio-communications devices (for example AM/FM radios, televisions, baby monitors,  
cordless phones, etc.). Any cable that is connected to the device must be a shielded cable that is properly grounded. There is,  
however, no guarantee that RF interference will not occur in a particular installation.  
Your Microsoft hardware device has been tested, and it complies with the limits for a Class B digital device in accordance  
with the specifications in Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  
harmful RF interference in a residential installation.  
To determine if your hardware device is causing interference to other radio-communications devices, disconnect the device  
from your computer. If the interference stops, it was probably caused by the device. If the interference continues after you  
disconnect the hardware device, turn the computer off and then on again. If the interference stopped when the computer  
was off, check to see if one of the input/output (I/O) devices or one of the computer’s internal accessory boards is causing  
the problem. Disconnect the I/O devices one at a time and see if the interference stops.  
If this hardware device does cause interference, try the following measures to correct it:  
Relocate the antenna of the other radio-communications device (for example AM/FM Radios, televisions, baby  
monitors, cordless phones, etc.) until the interference stops.  
Move the hardware device farther away from the radio or TV, or move it to one side or the other of the radio or TV.  
Plug the computer into a different power outlet so that the hardware device and radio or TV are on different circuits  
controlled by different circuit breakers or fuses.  
If necessary, ask your computer dealer or an experienced radio-TV technician for more suggestions. You may find  
helpful information in the booklet “The Interference Handbook” (1995), published by the FCC. The booklet is available  
Note  
Any changes or modifications not expressly approved by Microsoft could void the user’s authority to operate this device.  
For use with UL Listed and GS approved personal computers.  
Not intended for use in machinery or industrial applications.  
Tested to comply with FCC standards. For home and office use. Model Number: MN-100, MN-110, MN-120, MN-130, MN-  
150, MN-500, MN-510, MN-520.  
Microsoft Corporation  
One Microsoft Way  
Redmond, WA 98052-6399.  
(800) 426-9400 (United States)  
(800) 933-4750 (Canada)  
Canadian Radiocommunication Regulations  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
46 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
Limited Warranty  
PLEASE READ THIS MANUFACTURER’S GUARANTEE CAREFULLY TO UNDERSTAND YOUR RIGHTS AND OBLIGATIONS  
MANUFACTURER’S GUARANTEE AND LIMITATION OF LIABILITY  
NOTE: The following guarantee is not restricted to any territory and does not affect any statutory rights that you  
may have.  
The term “Hardware Device” means the enclosed Microsoft Hardware Device. This Manufacturer’s Guarantee does  
not cover your data, or any separate software, whether or not packaged or included with the Hardware Device.  
MICROSOFT GUARANTEE. Microsoft guarantees (this “Guarantee”) that on the day you receive the Hardware Device and  
for the next two (2) years thereafter (a) the Hardware Device will be substantially free from defects in materials and  
workmanship, and (b) any support services provided by Microsoft will be substantially as described in applicable written  
materials provided to you by Microsoft, and Microsoft support engineers will use reasonable efforts, care and skill to solve  
any problem issues. In the event that the Hardware Device fails to comply with this Guarantee, Microsoft shall either, at  
Microsoft’s option, (a) repair or replace the Hardware Device or (b) return the price you paid for the Hardware Device (if any),  
provided that you return the Hardware Device to Microsoft with a copy of your receipt of purchase. You may exercise this  
remedy without charge, except that you are responsible for any expenses you may incur. This Guarantee is void if failure of  
the Hardware Device results from any accident, abuse or misapplication. Any replacement Hardware Device shall be  
guaranteed for the remainder of the original Guarantee period or thirty (30) days, whichever is longer. Microsoft shall not  
be liable for any loss or damage that you could have reasonably avoided, for example, by backing up your software and  
files regularly.  
EXCLUSION OF ALL OTHER TERMS. YOU AGREE THAT THIS GUARANTEE IS YOUR SOLE GUARANTEE IN RELATION TO THE  
HARDWARE DEVICE AND ANY SUPPORT SERVICES. MICROSOFT AND ITS SUPPLIERS MAKE NO OTHER GUARANTEES OR  
WARRANTIES WITH RESPECT TO THE HARDWARE DEVICE, THE SUPPORT SERVICES AND ANY PRODUCT MANUAL(S) OR  
OTHER WRITTEN MATERIALS THAT ACCOMPANY THE HARDWARE DEVICE. TO THE MAXIMUM EXTENT PERMITTED BY  
APPLICABLE LAW AND SUBJECT TO THIS GUARANTEE, MICROSOFT AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES,  
CONDITIONS AND OTHER TERMS, EITHER EXPRESS OR IMPLIED (WHETHER BY STATUTE, COMMON LAW, COLLATERALLY  
OR OTHERWISE), INCLUDING BUT NOT LIMITED TO ANY (IF ANY) IMPLIED WARRANTIES OR CONDITIONS OF  
MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR PARTICULAR PURPOSE, LACK OF VIRUSES, LACK OF  
NEGLIGENCE, LACK OF WORKMANLIKE EFFORT, TITLE, AUTHORITY, OR NONINFRINGEMENT WITH RESPECT TO THE  
HARDWARE DEVICE, THE SUPPORT SERVICES AND THE PRODUCT MANUAL(S) OR OTHER WRITTEN MATERIALS THAT  
ACCOMPANY THE HARDWARE DEVICE. ANY IMPLIED WARRANTIES THAT ARE NOT DEEMED EXCLUDED ARE LIMITED TO  
THE ORIGINAL GUARANTEE PERIOD OR TO THE SHORTEST PERIOD PERMITTED BY APPLICABLE LAW, WHICHEVER IS  
GREATER.  
LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW AND EXCEPT AS PROVIDED IN  
THIS GUARANTEE, MICROSOFT AND ITS SUPPLIERS SHALL NOT BE LIABLE FOR ANY DAMAGES WHATSOEVER  
(INCLUDING WITHOUT LIMITATION, SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, DAMAGES FOR  
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR OTHER PECUNIARY  
LOSS, FOR PERSONAL INJURY OR FOR FAILURE TO MEET ANY DUTY INCLUDING GOOD FAITH OR REASONABLE CARE,  
OR FOR NEGLIGENCE) ARISING OUT OF THE USE OR INABILITY TO USE THE HARDWARE DEVICE, EVEN IF MICROSOFT  
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE MICROSOFT’S ENTIRE LIABILITY UNDER  
ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE HARDWARE  
DEVICE. THESE LIMITATIONS DO NOT APPLY TO ANY LIABILITIES THAT CANNOT BE EXCLUDED OR LIMITED BY  
APPLICABLE LAWS. THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM  
EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.  
REGISTRATION. You need not return the registration card for this Guarantee to be effective.  
BENEFICIARY. To the extent allowed by applicable law, this Guarantee is only made to you, the first user of the Hardware  
Device, and there are no third party beneficiaries of this Guarantee. It is not intended for and does not apply to anyone else  
(except as required by law).  
GOVERNING LAW. If you acquired the Hardware Device in the United States of America, the laws of the State of Washington,  
U.S.A., apply to this agreement. If you acquired this Hardware Device in the European Union, Iceland, Norway or Switzerland  
then local laws apply. If you acquired this product in Canada, except where expressly prohibited by local laws, the laws in  
force in the Province of Ontario, Canada apply to this agreement and each of the parties hereto irrevocably attorns to the  
jurisdiction of the courts of the Province of Ontario and further agrees to commence any litigation which may arise hereunder  
in the courts located in the Judicial District of York, Province of Ontario.  
If you acquired this Hardware Device outside of the countries listed above, then local laws may apply.  
QUESTIONS. Should you have any questions concerning this agreement, or if you desire to contact Microsoft for any reason,  
please use the address information enclosed in this Hardware Device to contact the Microsoft subsidiary serving your  
Reference 47  
 
Limited Warranty Continued  
VEUILLEZ VOUS ASSURER QU’APRÈS UNE LECTURE ATTENTIVE VOUS AYEZ BIEN COMPRIS L’ENSEMBLE DES DROITS  
ET LIMITATIONS EXPOSÉES DANS CETTE GARANTIE DU FABRICANT  
GARANTIE ET EXCLUSION DE RESPONSABILITÉ DU FABRICANT  
REMARQUE : La garantie ci-dessous n’est pas limitée à un territoire particulier, et n’influence en aucune manière les  
droits légaux dont vous disposez.  
« Dispositif matériel » désigne le dispositif matériel Microsoft ci-inclus. Cette Garantie du Fabricant ne s’applique pas à  
vos données ou aux logiciels séparés, qu’ils soient ou non emballés ou inclus avec le Dispositif matériel.  
GARANTIE MICROSOFT. Microsoft garantit (la « Garantie ») que pour une période de 2 ans à compter de la date de  
réception : (a) le Dispositif matériel sera, pour l’essentiel, exempt de vices matériels et de fabrication ; et (b) tout service  
d’assistance fourni par Microsoft sera, pour l’essentiel, conforme à la documentation imprimée applicable fournie par  
Microsoft, et les ingénieurs du service technique de Microsoft feront des efforts raisonnables pour résoudre toute difficulté  
technique. Dans l’éventualité où le Dispositif matériel manque d’être conforme aux stipulations de la présente Garantie,  
Microsoft pourra, au choix de Microsoft, (a) réparer ou remplacer le Dispositif matériel ; ou (b) rembourser le prix que vous  
avez payé pour le Dispositif matériel (le cas échéant), à condition que le Dispositif matériel soit retourné à Microsoft avec  
une copie de votre reçu. Vous êtes libre d’exercer ce recours sans frais, à l’exception que vous êtes seul responsable des  
dépenses que vous encourrez. Cette Garantie est nulle si le défaut du Dispositif matériel est causé par un accident, un  
traitement abusif ou une mauvaise application. Tout Dispositif matériel de remplacement sera garanti pour le reste de la  
période de garantie initiale ou pour trente (30) jours, selon la plus longue de ces périodes. Microsoft n’est en aucun cas  
responsable des pertes et dommages que vous auriez pu raisonnablement éviter en sauvegardant régulièrement vos  
logiciels et vos données, par exemple.  
EXCLUSION DE TOUTES AUTRES CONDITIONS. VOUS RECONNAISSEZ QUE LA GARANTIE CI-DESSUS EST VOTRE SEUL  
RECOURS EN CE QUI CONCERNE LE DISPOSITIF MATÉRIEL ET LES SERVICES D’ASSISTANCE. MICROSOFT ET SES  
FOURNISSEURS NE FONT AUCUNE AUTRE GARANTIE QUANT AU DISPOSITIF MATÉRIEL, AUX SERVICES D’ASSISTANCE ET  
AUX MANUELS DE PRODUIT OU TOUTE AUTRE DOCUMENTATION IMPRIMÉE ACCOMPAGNANT LE DISPOSITIF MATÉRIEL.  
DANS TOUTE LA MESURE PERMISE PAR LA RÉGLEMENTATION APPLICABLE ET CONFORMÉMENT À LA GARANTIE,  
MICROSOFT ET SES FOURNISSEURS EXCLUENT TOUTE GARANTIE ET AUTRES CONDITIONS, EXPRESSES OU IMPLICITES  
(PAR JURISPRUDENCE, DROIT COUTUMIER, SECONDAIRE OU AUTRE), Y COMPRIS, DE MANIÈRE NON LIMITATIVE, TOUTE  
GARANTIE IMPLICITE DE QUALITÉ, D’ADÉQUATION À UN USAGE PARTICULIER, D’ABSENCE DE VIRUS, DE NÉGLIGENCE ET  
DE DÉFAUT DE FABRICATION, DE TITRE, D’AUTORITÉ OU D’ABSENCE DE CONTREFAÇON EN CE QUI CONCERNE LE  
DISPOSITIF MATÉRIEL, LES SERVICES D’ASSISTANCE, LES MANUELS DE PRODUIT ET AUTRES DOCUMENTS IMPRIMÉS  
ACCOMPAGNANT LE DISPOSITIF MATÉRIEL. TOUTE GARANTIE IMPLICITE QUI N’EST PAS EXCLUE EST LIMITÉE À LA  
PÉRIODE DE GARANTIE D’ORIGINE OU À LA PLUS COURTE PÉRIODE PERMISE PAR LA RÉGLEMENTATION APPLICABLE,  
SI CELLE-CI EST PLUS LONGUE.  
EXCLUSION DE RESPONSABILITÉ. DANS TOUTE LA MESURE PERMISE PAR LA RÉGLEMENTATION APPLICABLE ET SAUF  
STIPULATION CONTRAIRE DANS CETTE GARANTIE, MICROSOFT OU SES FOURNISSEURS NE POURRONT EN AUCUN CAS  
ÊTRE TENUS RESPONSABLES DE TOUT DOMMAGE DE QUELQUE NATURE QUE CE SOIT (NOTAMMENT ET DE MANIÈRE  
NON LIMITATIVE LES DOMMAGES SPÉCIAUX, ACCESSOIRES, INCIDENTS OU INDIRECTS POUR PERTES DE BÉNÉFICES,  
INTERRUPTIONS D’ACTIVITÉ, PERTES D’INFORMATIONS OU AUTRES PERTES PÉCUNIAIRES, POUR PRÉJUDICES  
CORPORELS OU MANQUEMENT À TOUTE OBLIGATION (NOTAMMENT LOBLIGATION DE BONNE FOI ET DE DILIGENCE), OU  
POUR DES ACTES DE NÉGLIGENCE, RÉSULTANT DE LUTILISATION OU DE LIMPOSSIBILITÉ D’UTILISER LE DISPOSITIF  
MATÉRIEL, MÊME SI MICROSOFT OU UN QUELCONQUE FOURNISSEUR A ÉTÉ PRÉVENU DE L’ÉVENTUALITÉ DE TELS  
DOMMAGES. EN TOUT ÉTAT DE CAUSE, LA RESPONSABILITÉ TOTALE DE MICROSOFT AU TITRE DE TOUTE STIPULATION  
DU PRÉSENT CONTRAT NE SAURAIT EXCÉDER LE MONTANT QUE VOUS AVEZ EFFECTIVEMENT PAYÉ POUR LE DISPOSITIF  
MATÉRIEL. CES LIMITATIONS NE S’APPLIQUENT À AUCUNE OBLIGATION QUI NE PEUT ÊTRE EXCLUSE OU LIMITÉE PAR  
LES LOIS EN VIGUEUR. LES PRÉSENTES LIMITATIONS ET EXCLUSIONS DEMEURERONT APPLICABLES DANS TOUTE LA  
MESURE PERMISE PAR LA RÉGLEMENTATION EN VIGUEUR, QUAND BIEN MÊME UN QUELCONQUE RECOURS NE  
PRODUIRAIT PAS D’EFFET.  
ENREGISTREMENT. Il n’est pas nécessaire de renvoyer la carte d’enregistrement pour faire valoir la présente Garantie.  
BÉNÉFICIAIRE. Dans la mesure permise par la réglementation applicable, la présente Garantie s’applique uniquement à  
vous, le premier utilisateur du Dispositif matériel, et aucun tiers ne peut devenir le bénéficiaire de cette Garantie. La  
Garantie n’est pas destinée et ne s’applique pas à d’autres personnes que vous (à moins que cela ne soit requis par la loi).  
DROIT APPLICABLE. Si vous avez acquis le Dispositif matériel aux États-Unis, ce CLUF est régi par les lois de l’État de  
Washington, États-Unis d’Amérique. Si le Dispositif matériel a été acquis en Union Européenne, en Islande, en Norvège ou en  
Suisse, le droit local pourra, le cas échéant, s’appliquer. Si vous avez acquis le Dispositif matériel au Canada, les lois en  
vigueur de la province d’Ontario, Canada, s’appliqueront à ce contrat et chacune des parties aux présentes accepte les  
tribunaux de la province d’Ontario, et accepte d’entamer tout litige lié aux présentes dans les tribunaux situés dans le  
District juridique de York, province d’Ontario.  
Si vous avez acquis le Dispositif matériel en dehors des pays énoncés ci-dessus, le droit local pourra, le cas échéant, s’appliquer.  
QUESTIONS. Pour toute question relative à ce contrat, ou si vous souhaitez contacter Microsoft pour toute autre raison,  
veuillez vous reporter à l’adresse fournie dans la documentation accompagnant ce Dispositif matériel pour contacter la  
48 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
Technical Specifications  
PCI Adapter  
Standards  
IEEE 802.3 Ethernet;  
IEEE 802.3u Fast Ethernet;  
IEEE 802.3x 100BASE-TX Flow Control;  
IEEE 802.1 p/Q Quality of Service; PCI Bus 2.2 ACPI;  
OnNow/PC 98, PC 99; DMI 2.0, Wired for Management 2.0  
Host Interface  
PCI Bus compliant to PCI spec 2.2; 32-bit  
Network Interface  
Ethernet IEEE 802.3 and 802.3u CSMA/CD;  
Built-in RJ-45 connector;  
Auto-negotiation 10/100 Mbps;  
Full-duplex support  
Data rate  
10 and 100 Mbps, full- and half-duplex  
Link/Activity LED combined  
5 V @ 180 mA  
Indicators  
Power  
Operating Temperature  
Storage Temperature  
Humidity  
0 to 40 °C  
-25 to 60 °C  
10 to 95 percent non-condensing  
FCC Part 15 Class B compliant; Canada ICES-003  
UL 60950 / CSA-C22.2 No 60950  
4.72” x 1.69” (119.9 x 42.9 mm) without mounting bracket  
1.63 oz (46.1g)  
Emissions  
Safety  
Physical Dimensions  
Weight  
Reference 49  
 
System Requirements  
To use the Microsoft Broadband Networking Ethernet PCI Adapter:  
O
Personal computer with an available PCI slot  
O
Personal computer with processor running Microsoft Windows 98, Windows 98 SE, Windows  
Millennium Edition (Windows Me), Windows 2000 Professional, Windows XP Professional, or  
Windows XP Home Edition operating system.  
Additional requirements for using the Microsoft Broadband Networking setup wizard and  
Network Utility:  
O
Microsoft Internet Explorer 5.0 or later; setup will install Internet Explorer 6.0 browser  
components if needed, but will not displace your primary browser.  
O
28MB of available hard-disk space if you already have Internet Explorer 5.5 or 6.0; 132 MB of  
available hard-disk space if you are installing Internet Explorer for the first time.  
O
4x or faster CD-ROM drive  
O
VGA or higher-resolution monitor  
Recommended:  
O
Microsoft Mouse or compatible pointing device  
O
3.5” high-density disk drive  
50 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
glossary.  
This glossary contains common terms for wired and wireless  
networking.  
100Base-T  
10Base-T  
Also known as “Fast Ethernet,” an Ethernet cable standard with a  
data transfer rate of up to 100 Mbps.  
An older Ethernet cable standard with a data transfer rate of up to  
10 Mbps.  
802.11, 802.11b  
A family of IEEE-defined specifications for wireless networks.  
Includes the 802.11b standard, which supports high-speed (up to  
11 Mbps) wireless data transmission. Microsoft® Broadband  
Networking wireless products comply with the 802.11b standard.  
802.3  
The IEEE-defined specification that describes the characteristics of  
Ethernet connections.  
access point  
See wireless access point.  
ad hoc network  
A solely wireless computer-to-computer network. Unlike an  
infrastructure network, an ad hoc network does not include a  
central base station, router, or gateway.  
adapter  
See network adapter.  
base station  
A device (also known as a router or gateway) that acts as a central  
point for networked devices, receives transmitted messages, and  
forwards them. Microsoft Broadband Networking base stations can  
link many computers on a single network, and can share a secure  
Internet connection with wired and wireless devices.  
broadband connection  
broadband modem  
A high-speed connection, typically 256 Kbps or faster. Broadband  
services include cable modems and DSL.  
A device that enables a broadband connection to access the  
Internet. The two most common types of broadband modems are  
cable modems, which rely upon cable television infrastructure, and  
DSL modems, which rely upon telephone lines operating at DSL  
speeds.  
cable modem  
CAT 5 cable  
See broadband modem.  
Abbreviation for “Category 5 cable.” A type of Ethernet cable that  
has a maximum data rate of 100 Mbps.  
client  
Any computer or program that connects to, or requests the  
services of, another computer or program on a network. For a local  
area network or the Internet, a client is a computer that uses  
shared network resources provided by a server.  
 
client/server network  
computer name  
A network of two or more computers that rely upon a central server  
to mediate the connections or provide additional system resources.  
This dependence upon a server differentiates a client/server  
network from a peer-to-peer network.  
A name that uniquely identifies a computer on the network so that  
all its shared resources can be accessed by other computers on  
the network. One computer’s name cannot be the same as any  
other computer or domain name on the network.  
crossover cable  
DHCP  
See Ethernet cable.  
Acronym for “Dynamic Host Configuration Protocol.” A TCP/IP  
protocol that automatically assigns temporary IP addresses to  
computers on a local area network. Microsoft Broadband  
Networking base stations support the use of DHCP which,  
combined with ICS, allows you to share one Internet connection  
with multiple computers on a network.  
dial-up connection  
An Internet connection of limited duration that uses a public  
telephone network rather than a dedicated circuit or some other  
type of private network. The Microsoft Broadband Networking  
hardware does not support the use of a dial-up connection to the  
Internet.  
DNS  
Acronym for “Domain Name System.” A data query service chiefly  
used on the Internet for translating host names into Internet  
addresses. The DNS database maps DNS domain names to IP  
addresses, so that users can locate computers and services  
through user-friendly names.  
domain  
In a networked computer environment, a collection of computers  
that share a common domain database and security policy. A  
domain is administered as a unit with common rules and  
procedures, and each domain has a unique name.  
driver  
DSL  
Within a networking context, mediates communication between a  
computer and a network adapter installed on that computer.  
Acronym for “Digital Subscriber Line.” A constant, high-speed  
digital connection to the Internet that uses standard copper  
telephone wires.  
DSL modem  
duplex  
See broadband modem.  
A mode of connection; full-duplex transmission allows for the  
simultaneous transfer of information between the sender and the  
receiver. Half-duplex transmission allows for the transfer of  
information in only one direction at a time.  
dynamic IP address  
The IP address assigned (using the DHCP protocol) to a device that  
requires it. A dynamic IP address can also be assigned to a router  
by an ISP.  
52 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
encryption  
The process of encoding data to prevent unauthorized access,  
especially during transmission. Microsoft wireless hardware relies  
upon encryption to ensure that data transmissions cannot be  
accessed by users outside the network. Also see WEP.  
Ethernet  
Ethernet cable  
firewall  
A networking standard that uses cables to provide network access.  
A type of cable that facilitates network communications.  
A security system that protects a network from external threats,  
such as hacker attacks, originating outside the network. A  
hardware firewall is a connection routing device with specific data-  
checking settings, that protects all of the devices connected to it.  
The Microsoft Broadband Networking Base Station includes a  
hardware firewall. A software firewall resides on a single computer,  
protecting that computer from external threats. See Microsoft  
Windows® XP Help for more information about the Internet  
Connection software firewall.  
firmware  
gateway  
Software information stored in non-volatile memory on a device.  
See base station.  
gateway address  
The IP address used when making a connection outside your  
immediate network.  
host name  
hub  
The DNS name of a device on a network, used to simplify the  
process of locating computers on a network.  
A device with multiple ports that serves as a central connection  
point for communication lines from all devices on a network. When  
data arrives at one port, it is copied to the other ports.  
ICS  
Acronym for “Internet Connection Sharing.” A software feature in  
Microsoft Windows that allows computers on a network to access  
online services through a single Internet connection. Microsoft  
Broadband Networking hardware replaces software ICS.  
infrastructure network  
A network configuration in which wireless devices connect to an  
existing network.  
Internet domain  
IP address  
See domain.  
Acronym for “Internet Protocol” address. IP is the protocol within  
TCP/IP that is used to send data between computers over the  
Internet. An IP address is an assigned number used to identify a  
computer that is connected to a network through TCP/IP. An IP  
address consists of four numbers (each of which can be no greater  
than 255) separated by periods, such as 192.168.1.1.  
ISP  
Acronym for “Internet Service Provider.” A company that provides  
individuals or companies access to the Internet.  
Glossary 53  
 
LAN  
MAC address  
Mbps  
Acronym for “local area network.” A group of computers and other  
devices dispersed over a relatively limited area (for example, a  
building) and connected by a communications link that enables  
any device to interact with any other on the network.  
Acronym for “media access control” address. The address that is  
used for communication between network adapters on the same  
subnet. Each network adapter is manufactured with its own unique  
MAC address.  
Abbreviation of “megabits per second.” A unit of bandwidth  
measurement that defines the speed at which information can be  
transferred through a network or Ethernet cable. One megabyte is  
roughly equivalent to eight megabits.  
modem  
NAT  
A device that facilitates the transmission and reception of  
information between computers.  
Acronym for “network address translation.” The process of  
converting between IP addresses used within a private network  
and Internet IP addresses. NAT enables all of the computers on a  
network to share one IP address. The Microsoft Broadband  
Networking Base Station supports NAT, which provides an extra  
layer of network security by masking the actual IP addresses of the  
computers using a base station.  
network  
A collection of two or more computers that are connected to each  
other through wired or wireless means. These computers can share  
access to the Internet and the use of files, printers, and other  
equipment.  
network adapter  
Also known as a “network interface card” (NIC). An expansion card  
or other device used to provide network access to a computer,  
printer, or other device.  
PC Card  
A peripheral that adds memory, mass storage, modem capability,  
or other networking services to portable computers.  
peer-to-peer network  
Also known as a computer-to-computer network. A network of two  
or more computers that communicate without using a central  
server. This lack of reliance upon a server differentiates a peer-to-  
peer network from a client/server network.  
Plug and Play  
port  
A set of specifications that allows a computer to automatically  
detect and configure various peripheral devices, such as monitors,  
modems, and printers.  
A physical connection through which data is transferred between a  
computer and other devices (such as a printer, monitor, or  
modem), a network, or another computer. Also, a software channel  
for network communications.  
54 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
PPPoE  
Acronym for “Point-to-Point Protocol over Ethernet.” A specification  
for connecting users on an Ethernet network to the Internet by  
using a broadband connection (typically through a DSL modem).  
Microsoft Broadband Networking hardware supports PPPoE for  
connections that require it.  
protocol  
A set of rules that computers use to communicate with each other  
over a network.  
RJ-11 connector  
An attachment used to join a telephone line to a device such as a  
modem.  
RJ-45 connector  
router  
An attachment found on the ends of all Ethernet cables.  
See base station.  
server  
A computer that provides shared resources, such as storage space  
or processing power, to network users.  
shared folder  
shared printer  
sharing  
A folder on a computer that has been made available for other  
people to use on a network.  
A printer connected to a computer that has been made available  
for other people to use on a network.  
To make the resources associated with one computer available to  
users of other computers on a network.  
SSID  
Acronym for “Service Set Identifier,” also known as a “wireless  
network name.” An SSID value uniquely identifies your network and  
is case sensitive.  
static IP address  
straight-through cable  
subnet  
A permanent Internet address of a computer (assigned by an ISP).  
See Ethernet cable.  
A distinct network that forms part of a larger computer network.  
Subnets are connected through routers and can use a shared  
network address to connect to the Internet.  
subnet mask  
switch  
Determines whether two computers on a network can  
communicate with each other directly. Similar in form to an IP  
address and typically provided by an ISP. An example of a subnet  
mask value is 255.255.0.0.  
A central device that functions similarly to a hub, forwarding  
packets to specific ports rather than broadcasting every packet to  
every port. A switch is more efficient when used within a high  
volume network.  
TCP/IP  
Acronym for “Transmission Control Protocol/Internet Protocol.” A  
networking protocol that allows computers to communicate across  
interconnected networks and the Internet. Every computer on the  
Internet communicates using TCP/IP.  
Glossary 55  
 
USB  
Acronym for “universal serial bus.” A hardware standard for easily  
connecting peripherals to a computer system.  
USB adapter  
A device that connects to a USB port; the Microsoft Broadband  
Networking Wireless USB Adapter is a type of USB adapter.  
USB connector  
USB port  
The end of the USB cable that is plugged into a USB port.  
A rectangular slot in a computer into which a USB connector is  
inserted.  
WAN  
WEP  
Acronym for “wide area network.” A geographically widespread  
network that might include many linked local area networks  
(LANs).  
Acronym for “Wired Equivalent Privacy,” also known as “Wireless  
Security.” A wireless network encryption mechanism that protects  
data transmitted over wireless networks. If you are operating a  
wireless network, it is strongly recommended that you enable WEP.  
Wi-Fi  
A commonly used term to mean the wireless 802.11b standard.  
wireless access point  
A device that exchanges data between wireless computers and  
wired computers on a network.  
wireless network name  
WLAN  
See SSID.  
Acronym for “wireless local area network.” A network that  
exclusively relies upon wireless technology for the device  
connections.  
workgroup  
A group of users working on a common project and sharing  
computer files, typically over a LAN. A user who has a home  
network that is not being controlled by a domain controller can be  
a member of a workgroup.  
56 Microsoft Broadband Networking PCI Adapter User’s Guide  
 
 
0702 Part No. X08-85246  
 
My Network Settings  
Use this page to record your network settings.  
Workgroup or domain name:  
Base station password (if applicable):  
Wide Area Network (WAN) Settings  
Complete this section only if your network has a base station (gateway or router). You can  
obtain this information from your Internet service provider (ISP). Your ISP might not require  
all of the settings listed below.  
Dynamic IP (DHCP) Settings  
Complete this section only if your ISP uses a DHCP connection.  
Host name (optional):  
Adapter MAC address (optional):  
Static IP Address Settings  
Complete this section only if your ISP has assigned you a specific IP address.  
Static IP address:  
Subnet mask:  
IP gateway address:  
Primary DNS server:  
Secondary DNS server:  
PPPoE Settings  
Complete this section only if your ISP uses PPPoE with your DSL connection.  
User name:  
Password:  
Service name (optional):  
 
M
0702 Part No. X08-85246  
 

Lexmark All in One Printer X4270 Series User Manual
LG Electronics Washer WM2077CW User Manual
Lincoln Electric Welder SVM136 A User Manual
Lucent Technologies Headphones 117A4 User Manual
Mackie Musical Instrument Onyx 80 User Manual
Makita Saw LS1221 User Manual
Mamp;S Systems Intercom System DMC 10 User Manual
M Audio Portable Speaker AV20 User Manual
Maxtor DVR 4 Channel DVR Digital Video Recorder User Manual
Melissa Microwave Oven 253 002 User Manual